ideal

iDEAL TP10KAC-DX: the two-post whose arm set is published in full On a two-post lift the arms decide almost everything — whether a low car can...

iDEAL A-2200IEH-XR: six lock heights, on a bench narrow enough for a real bay Most lift benches give you two useful heights: down, and up. The...

iDEAL BCA-3000: three sets of adapters in the box, and a deck that sets its own working height Most body carts are a frame with casters, and y...

iDEAL BCS-3000: a 3,000 lbs body cart that breaks down into two bundles when the job ends The specification that decides this purchase is not ...

iDEAL CPI / Rammstein Air RS-1001 Direct Fired Air Makeup Unit A spray booth is an exhaust machine. It throws conditioned shop air out of the...

Product Description FP14KAC-X: the alignment-ready FP14, and what the "AC" adds This is the alignment configuration of iDEAL's 14,000 lbs four...

Product Description iDEAL FP14KC-X: a 14,000 lb four-post you set up around the vehicles you actually work on Most four-post service lifts arr...

Product Description FR-55: the frame rack whose deck is also a lift Most frame racks sit at one height and stay there. The FR-55's deck is a s...

FR-77-20: a solid steel plate deck you can anchor almost anywhere on The specification line that separates this machine from the rest of the F...

Product Description FR-77T-18: the same 7,700 lbs rack, in a bench that fits a shorter bay The FR-77T-18 is not a smaller machine. It is the s...

Product Description FR-77T-20: tubular deck, two telescoping towers, 20' of bench A tubular deck is an open lattice rather than a solid plate,...

iDEAL iMobile MSC-6KLP: a 6,000 lb lift that never touches your floor Every other lift on this site is a building decision. Anchors, slab thic...

iDEAL IWA-60-8500-HD-K multi-axle 3D truck aligner No vehicle lift required. That single line is the whole proposition of this system: it is ...

Product Description MSC-13K-B-226: Siemens control gear on a 26,000 lbs mobile column set Mobile columns live or die on synchronisation, and i...

Product Description iDEAL MSC-13K-B-452 mobile column lifting set One technician can put this lift where it needs to go. Each column moves on...

Product Description iDEAL MSC-13K-B-678 - a six-column mobile lifting set Synchronisation on this set is handled by a Siemens PLC working wit...

MSC-18K-X-236: a 36,000 lbs column pair that runs off its own batteries This is a set of two iDEAL mobile columns rated 36,000 lbs as a pair, ...

iDEAL MSC-18K-X-472 Mobile Column Lift - Set of Four Every column in this set locks by itself and stops by itself. There is an independent me...

iDEAL MSC-18K-X-6108 Mobile Column Lift - Set of Six Six columns can stand up to 32'8" apart. That single figure is what separates this set f...

PSB-AFCF23B-AK: a cross-draft booth with tilt panels, built to be lit properly Cross-draft is the airflow pattern most collision shops actuall...

PSB-AFOFB1388-AK: an open-front booth you can service from the inside An A-frame open front booth has no doors. Air is drawn in across the who...

PSB-PMR1088-AK: a mixing room that can be built either way round A paint mixing room is not a small spray booth. Its job is to take the one ac...

Product Description iDEAL PSB-PSMCT: stainless steel, a lockable cabinet, and it arrives assembled Two things separate this mixing station fro...

Product Description iDEAL PSB-PSMTD: the mixing table that rolls, with the masking station built into it Most paint-room benches are fixtures....