All Products

Tuxedo SJ-35 Sliding Jack Most accessories for a four-post lift are sold to fit exactly one manufacturer's rails. The SJ-35 is built the other...

Tuxedo RJ-45 Rolling Bridge Jack The RJ-45 is a 4,500 lb rolling bridge jack that runs on a hand pump. No air line, no compressor, no hose tra...

TP9KAC-TUX: the arms are different lengths, and that is the whole point An asymmetric two-post lift is not a symmetric lift with a marketing w...

Tuxedo 8G-DRAIN: an 8 gallon drain with nothing on it that can break This is the simple one, and that is the point of it. The 8G-DRAIN has no ...

It is called a pit lift, and it does not need a pit That sentence is the single most useful thing on this page. "Pit lift" is trade shorthand ...

Product Description Tuxedo 18G-DRAIN: the 18 gallon drain you empty with a pump, not with your back Every used-oil drain fills. The difference...

Tuxedo M-1000C Motorcycle Lift with Cut Out The M-1000C is the cut-out version of Tuxedo's 1,000 lb pneumatic bench, and the cut-out is the re...

Tuxedo TP9KF-TUX: the two-post for a bay with a low roof Most 9,000 lb two-post lifts carry their equalisation overhead, which puts a beam som...

Tuxedo M-1500C-HR: it runs on air, and the accessories are already in the crate Two things separate the M-1500C-HR from the benches it sits al...

Product Description Tuxedo 24G-SE-DRAIN Self-Evacuating Oil Drain The job that ruins an oil drain is not filling it. It is emptying it. A full...

The control unit is on a movable stand — and on a truck tyre, that is a safety feature A heavy commercial tyre and rim is a stored-energy asse...

Tuxedo TC-430 Swing Arm Tire Changer The TC-430 is the swing-arm answer to a tilt-back machine, and the difference is not cosmetic: the mount/d...

Direct drive: the cylinders push the carriages, and nothing has to be equalised On most two-post lifts the two carriages are tied together by a...

Tuxedo MR6K-48X: a 6,000 lb mid-rise that does not have to own the bay The interesting thing about the MR6K-48X is not its capacity — plenty o...

Tuxedo 2158-TJ Transmission Jack: built to reach 80″, not to work off the floor Most transmission jacks are a floor jack with a saddle bolted ...

Tuxedo CR-3000 Car Rotator - 3,000 lb Capacity Tuxedo CR-3000 Car Rotisserie Two hydraulic jacks rated at 6,000 lb each sit under a rotis...

Tuxedo M-1000C-BLK Pneumatic Motorcycle Lift An 84" by 24" working platform is a lot of table. That is the defining number on the M-1000C-BLK:...

A truck balancer that still knows what to do with an alloy wheel Heavy-duty balancers are usually built for one job: a steel truck rim, clip-on...

Product Description The press arm on the left, and a swing arm that gets out of the way The suffix on this model is the specification. A press ...

Tuxedo WB-953 Wheel Balancer What sets the WB-953 apart from a bare-spindle balancer is what happens around the spin: a 38" hood drops over the...

Valor WB-CB66-VE: it balances slowly on purpose The specification most worth understanding on this machine is the one that sounds like a limita...

Tuxedo TC-400M-B Powersport Tire Changer The TC-400M-B is a tire changer built around small wheels rather than adapted to them. Its clamps clo...

Tuxedo TC-530: the air kit that keeps a pneumatic changer alive is already on it Pneumatic tyre changers rarely die of overwork. They die of ba...

The leverless head takes the tyre lever out of the job Almost every scratched alloy, every torn bead and a good share of workshop hand injuries...