TUXEDO Car Lifts and Auto Shop Equipment

Tuxedo SJ-35 Sliding Jack Most accessories for a four-post lift are sold to fit exactly one manufacturer's rails. The SJ-35 is built the other...

Tuxedo RJ-45 Rolling Bridge Jack The RJ-45 is a 4,500 lb rolling bridge jack that runs on a hand pump. No air line, no compressor, no hose tra...

TP9KAC-TUX: the arms are different lengths, and that is the whole point An asymmetric two-post lift is not a symmetric lift with a marketing w...

Tuxedo 8G-DRAIN: an 8 gallon drain with nothing on it that can break This is the simple one, and that is the point of it. The 8G-DRAIN has no ...

It is called a pit lift, and it does not need a pit That sentence is the single most useful thing on this page. "Pit lift" is trade shorthand ...

Tuxedo TP9KF-TUX: the two-post for a bay with a low roof Most 9,000 lb two-post lifts carry their equalisation overhead, which puts a beam som...

Tuxedo M-1000C Motorcycle Lift with Cut Out The M-1000C is the cut-out version of Tuxedo's 1,000 lb pneumatic bench, and the cut-out is the re...

Product Description Tuxedo 18G-DRAIN: the 18 gallon drain you empty with a pump, not with your back Every used-oil drain fills. The difference...

Tuxedo M-1500C-HR: it runs on air, and the accessories are already in the crate Two things separate the M-1500C-HR from the benches it sits al...

Tuxedo MR6K-48X: a 6,000 lb mid-rise that does not have to own the bay The interesting thing about the MR6K-48X is not its capacity — plenty o...

Direct drive: the cylinders push the carriages, and nothing has to be equalised On most two-post lifts the two carriages are tied together by a...

Tuxedo TC-430 Swing Arm Tire Changer The TC-430 is the swing-arm answer to a tilt-back machine, and the difference is not cosmetic: the mount/d...

The control unit is on a movable stand — and on a truck tyre, that is a safety feature A heavy commercial tyre and rim is a stored-energy asse...

Product Description Tuxedo 24G-SE-DRAIN Self-Evacuating Oil Drain The job that ruins an oil drain is not filling it. It is emptying it. A full...

Tuxedo CR-3000 Car Rotator - 3,000 lb Capacity Tuxedo CR-3000 Car Rotisserie Two hydraulic jacks rated at 6,000 lb each sit under a rotis...

Valor WB-CB66-VE: it balances slowly on purpose The specification most worth understanding on this machine is the one that sounds like a limita...

Product Description The press arm on the left, and a swing arm that gets out of the way The suffix on this model is the specification. A press ...

Tuxedo WB-953 Wheel Balancer What sets the WB-953 apart from a bare-spindle balancer is what happens around the spin: a 38" hood drops over the...

A truck balancer that still knows what to do with an alloy wheel Heavy-duty balancers are usually built for one job: a steel truck rim, clip-on...

Tuxedo M-1000C-BLK Pneumatic Motorcycle Lift An 84" by 24" working platform is a lot of table. That is the defining number on the M-1000C-BLK:...

Tuxedo 2158-TJ Transmission Jack: built to reach 80″, not to work off the floor Most transmission jacks are a floor jack with a saddle bolted ...

Valor TC-950: the machine that never touches the rim Every tyre shop has a story about a customer's alloy wheel and a mounting head. It is the ...

Tuxedo TC-400M-B Powersport Tire Changer The TC-400M-B is a tire changer built around small wheels rather than adapted to them. Its clamps clo...

An alignment rack, not a four-post with turnplate holes cut in it What separates the Tuxedo FP14KA-C from an ordinary four-post is the hardwar...