"Best" Level Car and Truck Lifts

Product Description Tuxedo LR-26-PAD: a 6,000 lb low-rise you can actually drive a low car onto The number that decides whether a low-rise lif...

An alignment rack, not a four-post with turnplate holes cut in it What separates the Tuxedo FP14KA-C from an ordinary four-post is the hardwar...

AMGO DX-12A: a 12,000 lb Alignment Scissor With a 9,000 lb Jack Built In The specification that separates the DX-12A from an ordinary alignmen...

BendPak 2 Post Lift PL-6000DCX 6,000 lb BendPak PL-6000DCX Two-Post Parking Lift The engineering decision that defines this lift is wh...

BendPak MDS-6EXTF: the rise is a menu, and BendPak publishes all three heights Most lifts give you one rise figure. The MDS-6EXTF is specified...

17 lock positions, every 4 in. up a 100 in. post Most four-post lifts give you a handful of parking heights and you learn to live with them. T...

A four-post lift tall enough to store a boat above a car Most four-post lifts stop rising at about the height of a tall man. The HD-7500PBX ke...

16AP-192: an extended-height beam, and the adapter set already in the crate Two things separate the 16AP-192 from the standard-height lift it ...

BendPak 16AP: nothing on the carriages to grease, for the life of the lift Ask any workshop what actually goes wrong with a two-post lift afte...

BendPak 12AP-SRT: a 12,000 lb two-post lift that deliberately stops at working height Almost every two-post lift is sold on how far up it goes...

BendPak 10APX-181: a forged-steel arm restraint rated to hold 2000 pounds sideways The most likely thing to go wrong on a two-post lift is not...

BendPak 10APX: arms that retract to 22 in. and reach out to 57 in. Two-post lifts are compared on capacity, and capacity is rarely the thing t...

A 93.5 in. post, so a full-capacity two-post lift fits a garage that cannot take one Every argument about two-post lifts eventually comes back...

BendPak PCL-18B-8 — Eight Columns, or Two Independent Fours The argument for eight columns is not really the biggest vehicle you can lift. It ...

BendPak PCL-18B-8, Low Voltage — the Eight-Column Set for a Standard Shop Supply This package exists for a specific and very practical reason:...

BendPak PCL-18B-6 Mobile Column Lifts, Set of Six The PCL-18B-6 is a six-column mobile lifting system for three-axle trucks, buses, refuse veh...

BendPak PCL-18B-6 — Six Columns, Built From Parts You Can Buy Here is the detail on this lift that almost no competing column set can match, a...

BendPak PCL-18B-4 Mobile Column Lifts, Set of Four — High Voltage The thing that separates these columns from a screw-drive mobile lift is whe...

BendPak PCL-18B-4 Mobile Column Lifts, Set of Four Four columns is the standard working set, and BendPak's cabling is the reason this configur...

BendPak PCL-18B-2 Mobile Column Lifts, Pair — High Voltage Read this first, because it is the thing most likely to cause a bad purchase: a pai...

BendPak PCL-18B-2 Mobile Column Lifts, Pair — Low Voltage The feature on these columns that nobody thinks about until they need it is the manu...

When it is down, the floor is just floor The SP-7XEF is the flush-mount member of this scissor family, and the whole argument for it is what y...

BendPak EVS4500 Mobile EV Battery and Powertrain Lift Table The detail that makes the EVS4500 an EV tool rather than a heavy scissor table is ...

A battery table that runs on its own battery The EVS3000 is a mobile scissor lift table for dropping and refitting electric-vehicle battery pa...