Scissor Lifts

AMGO MRP06: the ramps are not just ramps The detail worth building this page around sits in one line of AMGO's own feature list and gets n...

AMGO LR06 Portable Low Rise Lift The LR06 is a 6,000 lbs low-rise lift built to be moved. Gross weight is 849 lbs (385kg) and the power unit t...

iDEAL TLX-7000: a 7,000 lbs lift with no hydraulics, no power unit and no compressor Almost every low-rise lift on the market is a hydraulic ma...

BendPak LR-60P Portable Low-Rise Lift The letter that matters here is the P. The LR-60P is the low-rise scissor lift built to be moved — high-...

BendPak MDS-6EXTF: the rise is a menu, and BendPak publishes all three heights Most lifts give you one rise figure. The MDS-6EXTF is specified...

Buying the Atlas SLP9K: What It Needs, What It Comes With, and Who It Suits The SLP9K is a 9,000 lb full-rise scissor lift that collapses to 4"...

Atlas 12ASL: the last ten inches are the safest part of the cycle Most scissor lift descriptions talk about how high it goes. The more intere...

Atlas PX16A 16,000 lb Alignment Scissor Lift: Published Floor Requirement, Published Power Most alignment lift listings tell you what the lift...

Atlas 12AWFSL: the alignment rack with the second lift already inside it An alignment scissor lift holds a vehicle flat and square. The moment...

Atlas 12ASL Scissor Lift and RJ-6 Rolling Jack Combo: Decide the Mounting Before You Buy There is one decision on this package that cannot be ...

Atlas 12AWFSL Alignment Scissor Lift with Two RJ-6 Rolling Jacks: Wheels-Free by Design An alignment rack has a contradiction built into it. T...

AMGO MC-1200P — the air-driven motorcycle & ATV lift The P in MC-1200P is the pump. This 1,200 lbs powersports lift is driven by a pneumat...

When it is down, the floor is just floor The SP-7XEF is the flush-mount member of this scissor family, and the whole argument for it is what y...

BendPak EVS4500 Mobile EV Battery and Powertrain Lift Table The detail that makes the EVS4500 an EV tool rather than a heavy scissor table is ...

A battery table that runs on its own battery The EVS3000 is a mobile scissor lift table for dropping and refitting electric-vehicle battery pa...

Hofmann 12K Alignment Scissor Lift Hofmann 12K Scissor Alignment Lift — 12,000 lb Capacity The 12K's most useful feature is the one nobody ph...

Hofmann 14K Scissor Alignment Lift — 14,000 lb Capacity One line on this lift's specification separates it from every other alignment scissor...

Product Description Tuxedo LR-26-PAD: a 6,000 lb low-rise you can actually drive a low car onto The number that decides whether a low-rise lif...

74.4 in. long, and none of it above the floor The BendPak P-9000LTF is the flush-mount member of this low-rise family, and the number that exp...

BendPak MDS-6LP: three published working heights, not just "up" A mid-rise scissor lift is bought to put a car at the height that suits the jo...

BendPak LR-60 Low-Rise Lift The LR-60 is the fixed-position member of BendPak's low-rise family: a 6,000 lb scissor lift, 70.5" (1,791 mm) acr...

Four Parallelogram Support Bars Per Platform — Which Is How a Low-Rise Lift Reaches 10,000 lbs Low-rise lifts are usually the compromise you ...

AMGO DX-12A: a 12,000 lb Alignment Scissor With a 9,000 lb Jack Built In The specification that separates the DX-12A from an ordinary alignmen...