Atlas 12ASL 12,000 lb Capacity Alignment Scissor Lift
Couldn't load pickup availability
Shipping-FAQ's
Shipping Info
At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.
I Have The Equipment To Unload My Order
- Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.Aspects to keep in mind when choosing this option.
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
- In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
Aspects to keep in mind when choosing this option.
1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
Aspects to keep in mind when choosing this option.
1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Atlas 12ASL 12,000 lb Capacity Alignment Scissor Lift
Atlas 12ASL 12,000 lb Capacity Alignment Scissor Lift
The Atlas® 12ASL 12,000 lb. scissor alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed in the floor for flush mounting. The full frame under the scissor lift provides for maximum stability.
The separate control panel may be conveniently positioned to allow easy access for the operator. The 220 volt (single phase) electric/hydraulic power unit is housed inside the metal control panel box. The push button controls activate the raising and lowering of the lift. The sophisticated air actuated lock system is automatically engaged and disengaged as the lift is being raised or lowered. The lift has a safety lowering limit switch. Once the lift platforms are lowered to within 10" of the ground, the lift automatically stops its descent. The Down button needs to be released and depressed again to allow the lift to go down completely.
The Atlas® 12ASL has welded rails on the inside of the runways allowing the customer the option of using a rolling jack (such as the Atlas® RJ-6).
Quality workmanship, ease of operation, straightforward installation, durable powder coat finish, and the lowest prices in the industry make the Atlas® 12ASL an ideal choice. This system maximizes floor space while servicing everything from small imports to one-ton duallies.
Product Features
- 12,000 LB. Capacity
- Commercial Grade
- Scissor Alignment Lift
- Built-in Slip Plates and Alignment Turntables Included
- Turntable Covers Included
- Open Center Design
- Air-Operated Single Point Lock Release
- Airline Kit & Rear Cross Beam Included
- Extra Long 72″ Ramps
- Platform Leveling Accuracy
- Separate Control Panel
- Emergency Manual Pump
- 19 Locking Positions
- CE Certified
- Surface or Flush Mount
- Mounting Hardware Included
- 220V/1PH Operation (30amp Breaker)
- Shipping Weight: 5,000 lb.
- 2yr Structural / 1yr Hydraulic Warranty
Product Specifications
| Model | 12ASL |
| Lifting Capacity | 12,000 lbs. |
| Lifting Height | 84 1/4" |
| Lowered Height | 11 1/2" |
| Overall Width | 86 3/8" |
| Length w/ Ramps | 250" |
| Length w/o Ramps | 197" |
| Ramp Length | 72" |
| 4-Wheel WB | Max 168" / Min 90" |
| 2-Wheel WB | Max 172" / Min 86" |
| Runway Width w/ Rail | 23 3/4" |
| Between Runways | 39 1/4" |
| Between Rails | 34 3/8" |
| Air Requirement | 90-120 PSI |
| Electrical | 220V +/- 5% Single Phase (30A) |
| Oil | 3-5 Gal. AW32 or AW46 (not included) |
| Concrete Requirement | 6" @ 3000 PSI |
| Shipping Weight | 5,000 lbs. |
Pick Up and Delivery
Our Pick Up locations for Atlas are in Atlanta, GA; Fresno, CA; Phoenix, AZ; Indiana, IN; and New Jersey, NJ.
Call, text, or chat with us if you have questions. - 866-774-7743
Downloads
Brochure
Manual
Warranty
