Scissor Lifts

AMGO MR06: three separate things have to fail before it drops Read AMGO's feature list for the MR06 closely and it describes a safety architec...

AMGO MRL09: a mid-rise you can set flush into the floor and then park on A mid-rise scissor lift normally costs you a bay whether it is workin...

BendPak MD-6XP Portable Mid-Rise Frame Lift The MD-6XP is a 6,000 lb mid-rise scissor lift that engages the vehicle's frame, rides on its own ...

AMGO XL-7: a 7,000 lb low-profile scissor lift built around a 24V control circuit The XL-7 is a portable-class scissor lift rated at 7,000 lbs...

Katool X90E: an 8,000 lb mid-rise scissor lift with a 24V control circuit The detail worth knowing about the X90E before anything else is that ...

It is called a pit lift, and it does not need a pit That sentence is the single most useful thing on this page. "Pit lift" is trade shorthand ...

AMGO XL-9F: a 9,000 lb flush-mount scissor lift that needs a recess and shop air The XL-9F is a full-rise scissor lift rated at 9,000 lbs whos...

AMGO LR10: 10,000 lbs of capacity on an ordinary 110V circuit The specification that changes who can actually buy this lift is the smallest on...

Katool KT-X85-ELECTRIC Mid Rise Scissor Lift Katool KT-X85-Electric: the release is electric and the controls run at 24V The word that ma...

Product Description AMGO MC-1200 Motorcycle & ATV Lift The MC-1200 is a 1,200 lbs powersports lift with one feature almost nobody in this ...

AMGO AX-16A: an alignment scissor that publishes the steel it is made from Most lift makers describe a scissor structure with adjectives. AMGO...

AMGO AX-12: 12,000 lbs held by two locks that fail in different ways The AX-12 is the general-service member of AMGO's X-scissor family, and t...

Katool KT-X95: no compressor, no lift The last line of this lift's own feature list is the one that should be first, because it is the only th...

Tuxedo MR6K-48X: a 6,000 lb mid-rise that does not have to own the bay The interesting thing about the MR6K-48X is not its capacity — plenty o...

BendPak MDS-6EXT: 78.7 in. platforms, because the lift points moved outboard The reason this model exists is a measurement. Standard mid-rise ...

BendPak MDS-6LPF: a flush-mount lift, and the honest arithmetic of recessing one Flush-mount lifts are sold on the floor they leave behind — d...

AMGO AX-12A: a 12,000 lb Scissor Whose Alignment Range Starts at 81 7/8″ Capacity is the easy half of choosing an alignment scissor. The half ...

Scissor Lift Atlas 7K-Kwik-Bay Portable Car Lift 7,000 lb Atlas 7K-Kwik-Bay Portable Mid-Rise Scissor Lift The defining feature of the 7K-Kwik...

Atlas 6PL Open Center Low Rise 6,000 lb Scissor Lift The two words in this lift's name that earn their place are open center. On most low-ris...

Atlas FM9SL — a flush lift with one rule you must follow The FM9SL is a 9,000 lb full-rise scissor lift that sets into the floor, so when it i...

Atlas LR06 Portable Low Rise 6,000 lb Scissor Lift Two things about the LR06 are unusual enough to decide the purchase, and neither is its ca...

Atlas 6MR Portable Mid-Rise Portable Car Lift 6,000 lb Capacity (Scissor Lift) Atlas 6MR: the power unit is also the trolley Most portable lift...

Katool KT-X66: a portable mid-rise that arrives with both adaptor stacks Most mid-rise scissor lifts are sold bare, and the pad adaptors that ...

The scissor lift with nothing running across the middle Almost every scissor lift ties its two frames together with a cross member. It is the ...