Specifications
-| Model | SP-RJ7K |
|---|---|
| Lifting Capacity | 7,000 Lbs |
| Overall Length | 23.75 |
| Overall Width | 45.75 |
| Overall Height | 7.25" - 17.75" |
| Lifting Height (Top of Runway) | 17.75" |
| Max Rise (Under Runway) | 22.75" |
Warranty
-Description
-Supreme SP-RJ7K – 7,000 LB Rolling Jack
The warranty is the spec sheet: 5 years structural, 3 years hydraulic and electrical, 1 year parts
Most rolling jacks are sold on capacity and nothing else. Supreme publishes something more useful about the SP-RJ7K — a warranty split into three named tiers rather than a single vague headline. A 5-year structural warranty covers the frame. A 3-year warranty covers the hydraulic and electrical components, which is where a jack that lives under vehicles actually fails. A 1-year parts warranty covers everything else from day one. A manufacturer willing to write down which subsystem gets which term is telling you something a capacity figure cannot.
The jack itself is a 7,000 lbs air/hydraulic bridge that turns a four-post parking lift into a service lift: raise one axle at a time for wheel, brake and suspension work without ever taking the vehicle back off the runways.
Will It Fit?
A rolling jack lives between the runways of a four-post lift, so fit is about your existing lift rather than your building.
- Lift compatibility. The SP-RJ7K is stated to integrate with Supreme four-post lifts, including the SP-85P, SP-11P and SP-12G, with no adaptors or modifications required. If you are running a Supreme four-post — for example the SP-85P parking lift — this is the matched jack for it.
- Working range. Minimum height 7.25", maximum lifting height 17.75". The low figure is what determines whether the jack rolls under a low-slung car sitting on the runways; the high one is how far you can get a wheel off the ground once you are there.
- Length along the runway. 23.75", which is the space it occupies fore-and-aft and therefore how easily you can leave it parked at one end while the lift is used for something else.
- Air supply. It is air/hydraulic and runs from your existing compressed-air supply. No pressure or flow requirement is published, so if your compressor is marginal, ask us before ordering.
- Width across the runways. Two figures are published for width — see the note below before you order. This is the dimension that decides whether the jack fits your lift, so please do not skip it.
Checking the jack against your specific lift is the buyer's responsibility, and it is a conversation we are happy to have first. Tell us the make and model of the four-post you own and we will confirm the fit.
Why a rolling jack changes what a parking lift is
A four-post lift is superb at holding a car and poor at letting the wheels hang. The tyres sit on the runways, which is the whole point when you are storing a vehicle and precisely the problem when you want to pull a brake rotor. The usual workaround — lower the lift, drive off, jack the car on the floor — turns a twenty-minute job into an hour and takes the bay out of use.
A bridge jack removes that entirely. It rolls along the runways, positions under the axle or the frame lift points, and takes one end of the car off the deck while the four-post keeps holding everything else. Wheel-off work, brake service, suspension and driveline jobs all become possible on a lift that was bought for parking. In a dealership or fleet bay that is a bay converted from storage to production; at home it is the difference between owning a lift and owning a car park.
Air/hydraulic, and why that suits this job
The SP-RJ7K raises on air-driven hydraulics rather than an electric power unit. On a jack this matters more than on a lift: the thing is meant to roll freely along the runways and be repositioned constantly, so a trailing air line is a far more forgiving tether than a mains cable, and there is no motor to add mass to something you push by hand.
It also means the jack draws from a supply most shops already have, with nothing added to the electrical installation. Supreme pairs that with precision rollers and a low-profile frame, both aimed at the same practical problem — aligning the saddles under the lift points without wrestling the jack into place while bent double under a car.
Perfect For
- Dealership and fleet bays where four-post lifts are already installed and wheel-off work is constant.
- Performance and restoration shops doing brake, suspension and driveline work on cars that live on the lift for days.
- Tyre and brake service — the single job a four-post lift cannot do unaided, and the one this jack exists for.
- The advanced home garage that already owns a four-post and has hit its limits.
What's in the Box
The listing describes the SP-RJ7K as a complete air/hydraulic rolling jack with a powder-coated heavy-duty steel frame and precision rollers. Two things it does not claim:
- No air compressor, hose or fittings are listed as supplied — external air is required.
- No adaptors are listed, and none are said to be needed for the Supreme four-post lifts named above.
If you want saddle pads or extension blocks for a particular vehicle's lift points, ask before you order.
Specifications
| Capacity and operation | |
|---|---|
| Lifting capacity | 7,000 lbs |
| Operation | Air/hydraulic — external air required |
| Frame | Powder-coated heavy-duty steel |
| Dimensions | |
|---|---|
| Minimum height | 7.25" |
| Maximum lifting height | 17.75" |
| Outside length | 23.75" |
| Width | see the note below |
| Warranty | |
|---|---|
| Structural | 5-year |
| Hydraulic and electrical | 3-year |
| All other parts | 1-year |
Two measurements to confirm before you order
Published figures for this jack differ on two measurements. Both are set out below exactly as they are recorded.
| Figure | Recorded as | What to check |
|---|---|---|
| Overall width | 45.75" | The inside figure is recorded as the larger of the two, so confirm which one spans your runways before you order. Width is the dimension that decides whether the jack fits your lift. |
| Inside width | 52.75" | |
| Maximum lifting height | 17.75" | The lower figure is corroborated by two independent sources; a third field records the larger one as "max rise". Confirm which measurement applies to the working height you need. |
| Max rise | 22.75" |
If either the width across your runways or the working height under a raised axle is what your purchase turns on, contact us and we will get the figure confirmed by Supreme in writing before you order.
Certification
No third-party safety listing is claimed in this product's data, and none is implied here. The distinction that matters to a buyer is between an independent body testing and auditing a design against published criteria, and a manufacturer stating conformity on its own account — they are different documents carrying different weight. Neither is recorded for this jack. If an insurer, a lease or an inspection regime requires the independent kind, establish exactly what they want and ask us for it before purchase.
Shipping and Delivery
The SP-RJ7K ships as palletised freight to the lower 48 states. Cost is quoted live at checkout for your address, because carrier rates move and a number printed here would be stale.
Even though a rolling jack is small next to a lift, it is dense steel and it arrives on a truck with no unloading help included. Have a forklift, a dock or enough hands ready, or take terminal pickup and collect it. Residential delivery is available and carries a residential fee.
Inspect it against the bill of lading before you sign. Look for bent saddle arms, damaged rollers, a struck frame and any sign of hydraulic weeping, and write what you find on the paperwork with the driver still there.
Warranty
Covered by Supreme's tiered warranty as set out above: 5-year structural, 3-year hydraulic and electrical, 1-year on all other parts. Our warranty claims page explains how to open a claim.
One point that protects all three tiers: do not disassemble a failed component before the claim is raised. An opened cylinder or valve is normally treated as tampering, and it can end cover that would otherwise have replaced the part outright. Photograph it, leave it intact, and call us.
Product Features
7,000 LB Lifting Capacity: Easily lifts trucks, SUVs, and heavy-duty vehicles — perfect for front or rear axle service on even the biggest rides.
Universal Compatibility: Seamlessly integrates with all Supreme four-post lifts, including the SP-85P, SP-11P, and SP-12G. No need for adaptors or special modifications.
Air/Hydraulic Operation: Smooth, effortless lifting powered by your existing air supply — giving you precise control and a reliable lift every time.
Compact, Low-Profile Design: Easy to maneuver and position under vehicles. Ideal for tight bays and quick-change jobs.
Industrial-Grade Construction: Built with heavy-duty steel and finished in a durable powder-coated frame that resists chips, corrosion, and daily shop abuse, this keeps low steamlined maintenance times
Smooth Rolling Performance: Precision rollers make it easy to align under lifting points — no wrestling or guesswork required, this rolling jack improves turnover time and accessiblity
Pick Up and Delivery
Our Pick Up locations for Supreme are located in Pooler, GA / Houston, TX / Kalamazoo, MI & City of Industry, CA.
Call, text, or chat with us if you have questions. 866-774-7743
Looking for jack stands? Check our our collection of jack stands here.
Frequently Asked Questions
Everything you need to know about our products and services
After placing your order, you'll receive a confirmation email within minutes. Our team will process your order within 1–2 business days. For large items like vehicle lifts, a freight carrier will contact you to schedule delivery. Smaller items ship via UPS or FedEx.
We offer a 30-day return policy for most items in original, unused condition. Vehicle lifts and heavy equipment may have restocking fees. Freight items must be inspected at delivery and any damage noted on the bill of lading. Contact us within 48 hours of delivery for damage claims.
Absolutely! We offer special pricing for shops, contractors, and bulk orders. Contact our sales team at 866-774-7743 or email sales@mechanicsuperstore.com for a custom quote. Volume discounts start at 3+ units.
Tracking information is sent once your order ships. If you haven't received it within 2 business days, check your spam folder. You can also track your order by logging into your account or contacting our support team at support@mechanicsuperstore.com.
Standard orders ship within 1–3 business days. Freight items (lifts, compressors) typically deliver within 5–10 business days. We offer expedited shipping options at checkout. Estimated delivery dates are shown on each product page.
Yes! All products come with manufacturer warranties. Lifts typically carry 1–3 year structural warranties. Compressors and equipment warranties vary by brand. We also offer extended warranty programs. Contact us for specific warranty details on any product.
We offer two financing options: Synchrony Bank (Buy Now, Pay Over Time) and SLS Financial (Interest Financing). Apply at checkout in minutes. Approval is typically instant. Subject to credit approval. See individual product pages for financing availability.
We partner with certified installation professionals nationwide. Installation quotes are available at checkout for select items. You can also find installation guides in our support center for DIY customers. Our expert team is available to walk you through the process.
Can't find what you're looking for? Our team is here to help.