Quincy 453D80VCB23M QT MAX 5-HP Air Compressor 230V 3-Phase
Couldn't load pickup availability
Shipping-FAQ's
Shipping Info
At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.
I Have The Equipment To Unload My Order
- Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.Aspects to keep in mind when choosing this option.
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
- In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
Aspects to keep in mind when choosing this option.
1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
Aspects to keep in mind when choosing this option.
1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
Quincy 453D80VCB23M QT MAX 5-HP Air Compressor 230V 3-Phase
Quincy 453D80VCB23M QT MAX 5-HP 80-Gallon Two-Stage Air Compressor (230V 3-Phase)
The Quincy QT MAX 5 HP compressor brings dependable compressed air performance to industrial and commercial settings with its 5 horsepower three-phase motor and an 80-gallon ASME-certified vertical tank. Its splash-lubricated, cast-iron two-stage pump delivers around 17.2 CFM at 175 PSI while operating at a low RPM (~1,750), which helps reduce heat and wear and extend service life beyond 50,000 hours. Built for longevity, the compressor features aluminum heads, stainless steel reed valves, finned intercoolers, and extra-capacity oil reservoirs. Safety and maintenance are enhanced through an automatic tank drain, low-oil shutoff protection, and a magnetic starter.
With minimal oil carry-over (under 5 ppm) and a continuous-duty design, it's ideal for fabrication shops, automotive bays, or any space with limited floor area. The unit ships with a standard one-year factory warranty on parts and labor. If the EWK‑3 maintenance kit is purchased at the time of sale and the compressor is registered promptly, the warranty extends to two years on the unit and three years on the pump, with on-site service included. Click on the manual link below for warranty information.
Product Features
- Heavy Duty Industrial Unit - Proudly Built in the US
- High-Efficiency Finned Intercooler
- Magnetic Starter
- 2-Piece Connection Rods
- ASME Certified Tank
- Automatic Tank Drain
- Air-Cooled Aftercooler
- 1-Year Factory Warranty - Extends To 3-Year "No Bull" Warranty
Product Specifications
General Information
| Product Category | Air Compressor - Stationary |
Motor
| Voltage | 230 Volt AC |
| Phase | Three Phase |
| Magnetic Starter | Yes |
| Amp Draw | 15.2 |
| Recommended Breaker | Consult Certified Electrician |
Engine
| HP | 5 |
Pump
| CFM | 17.2 |
| CFM Rated @ | 175 PSI |
| Pump Material | Cast Iron w/ Aluminum Head |
| Max PSI | 175 PSI |
| Oil Sight Glass | Yes |
| Pump Type | Two-Stage |
| After Cooler | Yes |
| Pump Drive | Belt Drive |
| Oil Type | Oil Lubricated |
| Oil System | Splash Lubricated |
| Pump Low Oil Shut-off | Yes |
Tank
| Tank Size | 80 Gallons |
| Tank Outlet | 3/4 Inch |
| Electronic Drain Valve | Yes |
| Tank Orientation | Vertical |
Accessories
| Air Dryer | No |
Overview
| Weight | 680 Pounds |
| Certification | ASME. UL, CSA |
| Consumer Warranty | 1 Year |
| Commercial Warranty | 1 Year |
| Product Length | 37 Inches |
| Product Width | 24 Inches |
| Product Height | 74 Inches |
| Power Type | Electric |
