The Katool KT-4H850 8,500 lbs 4 post heavy duty lift is built for professional use in automotive shops and garage environments where strength, safety, and durability are essential. With a rated lifting capacity of 8,500 lbs (approximately 3,850 kg), this lift handles many types of vehicles including sedans, SUVs, and light trucks with confidence. It is CE approved and certified, having been tested to meet 115 percent dynamic load and 150 percent static load standards, providing reliable performance under heavy use.

The heavy duty lift design features a robust four post structure that ensures stable weight distribution. Its runways are made with non-skid diamond plate surfaces for increased traction, improving safety during drive-on and drive-off operations. The posts stand 83.66 in (2,125 mm) high, allowing the lift to reach a maximum elevation of 70.87 in (1,800 mm). The minimum height of the runways is approximately 4.76 in (121 mm), giving clearance for low ground clearance vehicles. Inside column spacing measures about 94.72 in (2,406 mm), and the overall width spans 107.95 in (2,742 mm). With optional ramps, the lift’s total length can extend to 198.43 in (5,040 mm).

Operation times are optimized for shop productivity: lifting takes approximately 75 seconds, while lowering completes in about 40 seconds. These operating speeds enable technicians to move vehicles in and out of service quickly without undue delay. The lift’s hydraulic system is powered by a motor suited for either 110V/60Hz/1PH or 220V/60Hz/1PH configurations, giving flexibility depending on shop power availability.

Safety mechanisms are integral to its design. The KT-4H850 features a single-point manual safety lock release, allowing both columns to unlock simultaneously from one side. It also includes four mechanical locking devices, each with a primary and secondary safety lock system, minimizing the risk of unintended descent. A slack-cable secondary locking device adds redundancy in the event of line failure. The power side column is configurable, allowing installation on either the left or right side, or choice between front or rear orientation, depending on shop layout.

The lift includes practical features for workshop convenience. It ships with a caster kit to allow repositioning before final anchoring, drip trays to catch automotive fluids, and a jack tray for storing service tools. Its platforms provide slip resistance and are built to endure frequent use. The hydraulic system is designed with high quality components to ensure smooth, reliable operation across numerous cycles, and maintenance access is facilitated for routine checks, lubrication, and inspection of safety lock ladders and chains.

For installation, the KT-4H850 4 post heavy duty lift requires a concrete slab of at least 3.93 in (100 mm) thickness and minimum compressive strength of 3,000 psi. Proper foundation conditions are critical to performance and safety. Anchoring procedures must be followed accurately during installation to maintain the structural integrity of the lift and ensure reliable operation.

Regular maintenance is essential to preserve functionality and safety. Technicians should periodically inspect hydraulic lines, safety locks, runway surfaces, and structural welds. Lubrication of moving parts and prompt replacement of any worn components helps extend service life and reduce unplanned downtime. The CE certification and rigorous testing standards reflect the lift’s suitability for professional environments and provide assurance of its structural integrity and safety performance.

The KT-4H850 4 post lift is engineered to serve as a dependable workhorse in busy vehicle service facilities. Its blend of capacity, safety, flexible installation options, and thoughtful features like caster mobility and drip trays make it a strong candidate for shops needing a high performance 4 post lift.

Contact us for more information on this heavy duty lift.

Installing the KT-4H850 is straightforward, but proper concrete requirements are critical for safety. Ensure the concrete thickness is at least 3.93 inches (100 mm) with a 3,000 PSI rating. Failure to meet these specifications could lead to serious injury or equipment failure.