iDEAL PSB-PSMTD: the mixing table that rolls, with the masking station built into it
Most paint-room benches are fixtures. This one is not: at 78 lbs on 3" poly casters, the PSB-PSMTD is designed to be pushed to where the work is — alongside the booth, next to the car being masked, back against the wall when the floor is needed. The feature that pays for itself is on top of it: two tape and paper masking dispensers, so the masking materials travel with the mixing surface instead of living on a separate stand at the other end of the shop.
Add a dual spray gun holder with its own catch basin, a 32" working height and a 37" x 22" stainless top, and the unit becomes a single station for the three jobs that happen back to back: mix, mask, and put the gun down somewhere that will not drip on the floor.
Will It Fit?
-
Footprint. 46.5" wide, 21.75" deep, 32" tall overall. Compact enough to sit beside a booth door without blocking it.
-
Working height. 32" at the table. Check it against your existing bench — you will be mixing standing up, and a bench at the wrong height ends up used for storage.
-
The floor it will roll on. 3" casters are the practical constraint here. They deal with a sealed, level shop floor easily; a rough, broken or heavily sloped surface is what defeats a caster that size, and a rolling bench that will not roll is just a bench.
-
Weight and assembly. 78 lbs shipped, and iDEAL states that minor assembly is required — so allow a little time on arrival rather than expecting to use it out of the crate.
Assessing your own floor and space is the customer's responsibility. If you are unsure whether this will move where you need it to, describe the surface to us before you order.
Why masking dispensers on the bench change the workflow
Masking is not one job done once. It is done, checked, adjusted, and done again after the panel is prepped. Two tape and paper dispensers mounted on the same unit as the mixing top mean the technician stops walking — and a shop's real losses to layout are never one long walk, they are two hundred short ones. Having the dispensers travel with the bench also means the masking materials end up next to the vehicle, which is where the tape is actually pulled.
The gun holder and the catch basin
The dual spray gun holder is fitted with a catch basin underneath it. That is a small thing with a specific purpose: a gun set down after spraying or after a flush drips, and where it drips is either into a basin or onto a floor that someone will then walk paint across. Two holders let you park a colour gun and a clear gun, or a gun and a cleaning attachment, without either one going on the table top.
Stainless, because of what cleans it
The unit is built from heavy-duty stainless steel. In a mixing area the deciding factor is not load, it is chemistry: the solvents that clean the bench are the ones that will strip a painted finish, and once a painted bench is through its coating it starts corroding and shedding into the work. Stainless takes the cleaning regime a refinish operation genuinely runs, day after day.
Perfect For
-
Collision shops that mask and mix in the same bay and want the materials on one mobile unit.
-
Smaller body shops where floor space is shared and a fixed bench cannot be justified.
-
Booth-adjacent prep areas that need the station moved out of the way between jobs.
-
Restoration and custom painters working panel by panel rather than at a fixed line.
What's in the Box
Per this product's feature list: the stainless mixing table with its 37" x 22" top, the dual spray gun holder with catch basin, two tape and paper masking dispensers, and the 3" poly casters. Minor assembly is required, so expect fasteners and instructions in the crate. Tape, paper, guns and mixing equipment are not included. Ask us if you would like the packing contents confirmed before you order.
Specifications
| Model |
PSB-PSMTD |
| Construction |
Heavy-duty stainless steel |
| Overall size |
46.5" W x 21.75" D x 32" H |
| Table height |
32" |
| Table top area |
37" x 22" |
| Mobility |
3" poly casters |
| Fitted |
Dual spray gun holder with catch basin; two tape and paper masking dispensers |
| Assembly |
Minor assembly required |
| Ship weight |
78 lbs |
A note on this listing's model number
The product title on this page carries a garbled version of the model code — the unit is the PSB-PSMTD, as printed in its own specification block and on the manufacturer's documentation. If you are cross-referencing a quote or a parts list, use PSB-PSMTD. We are correcting the title.
On listings and approvals, stated plainly
Nothing in the published data for this unit claims a third-party listing or approval, and it makes no flammables-storage claim either. If your local fire code, your insurer or a manufacturer's refinish programme sets requirements for what may be stored or used at a mixing station, check those against the room rather than against the bench.
Shipping and delivery
The freight is quoted live at checkout for the lower 48 states, so the figure you see is current rather than a stale table. Shop furniture of this size normally travels crated on a freight carrier: arrange to unload it or take terminal collection, expect a residential fee if it is going to a home address, and inspect the crate before signing for it. Note any damage on the delivery receipt at the point of delivery — that receipt is the document a damage claim rests on.
Warranty
Rather than print a term we cannot stand behind, we publish the claims route and will confirm iDEAL's current warranty in writing on request before you order. In the event of a fault, leave the affected part assembled until the claim is opened. A caster, a dispenser mount or a gun holder can be assessed as it failed; the same component already stripped for a repair attempt usually cannot.
