BelAire 418VLE Elite Iron Series 7.5-HP 80-Gallon Two-Stage Compressor
Couldn't load pickup availability
Shipping-FAQ's
Shipping Info
At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.
I Have The Equipment To Unload My Order
- Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.Aspects to keep in mind when choosing this option.
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
- In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.
Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
Aspects to keep in mind when choosing this option.
1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.
Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.
Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
Aspects to keep in mind when choosing this option.
1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.
BelAire 418VLE Elite Iron Series 7.5-HP 80-Gallon Two-Stage Compressor
BelAire 418VLE Elite Iron Series 7.5-HP 80-Gallon Two-Stage Cast Iron Air Compressor (208-230V 1-Phase)
The BelAire 418VLE Elite Iron Series is a heavy-duty air compressor designed for demanding industrial and commercial environments. It features a powerful 7.5-horsepower motor that operates on 208-230V single-phase power, delivering 23 CFM at 100 PSI and 21 CFM at 175 PSI, with a maximum pressure of 175 PSI. The 80-gallon vertical ASME-certified tank provides substantial air storage capacity to support continuous operation and multiple users.
This compressor is built around a solid cast iron two-stage pump that runs at a low 900 RPM, which helps reduce wear and noise while extending the unit’s lifespan. It includes a magnetic starter for reliable motor protection and smooth startups. Safety and efficiency are further enhanced by features such as an automatic tank drain, an aftercooler to reduce discharge air temperature, and a low oil level switch to protect the pump.
Maintenance is straightforward with these built-in features, and the oil type recommended is 30W non-detergent oil. The unit measures approximately 37 inches long, 24 inches wide, and stands 72 inches tall, weighing about 610 pounds. It requires a 60-amp breaker for proper electrical protection. Backed by a two-year bumper-to-bumper warranty, the BelAire 418VLE offers dependable performance and peace of mind for workshop professionals.
Product Features
- BelAire 7.5-HP Elite Iron Series Splash Lubricated Air Compressor
- Great performance and value offer professional quality
- Lubricants protect against high heat and extend equipment life
- Fully packaged unit includes auto drain, aftercooler, magnetic starter, pressure switch and low oil switch
- Solid Cast Iron Pump Construction
- Adds dependability and smooth operation
- Finned coolers enable more efficient heat exchange
- Automotive-style rod bearing & wrist pins allow less oil carryover
- Space-saving concentric valves offer compact design and max delivery volume
- High-Performance Baldor Motor
- Runs smoothly, quietly and efficient as possible
- Improves your systems reliability and performance
- Thermal overload switch automatically prevents overheating
- Start-Stop Pressure Switch Controls
- Automatically controls on/off cycling of compressor
- Stops when cut-off pressure has reached capacity
- Magnetic Starter
- Safe method for starting an electric motor with a large load
- Under-voltage & overload protection w/ automatic cutoff in the event of a power failure
- High-Flow Wire Beltguard Aftercooler
- Cools compressed air & removes moisture from air stream
- Improves air quality for longer lifespan of tools and equipment
- Elite Series Automatic Tank Drain (Not Electronic)
- Pressurized auto draining makes tank maintenance effortless
- Routine draining prevents air contamination & prolongs tool life
- Low Oil Level Switch
- Automatically disables your compressor if the oil level is too low
- Protects your compressor's pump from seizing when your oil level drops
- 80-Gallon ASME Air Tank
- Pressure gauge shows the regulated pressure of compressed air
- Safety valves prevent pressure in tank from rising over limit
- 2 Year Bumper to Bumper Warranty
- No additional purchase necessary
- 100% factory tested
Product Specifications
General Information
| Product Category | Air Compressor - Stationary |
Motor
| Voltage | 208-230 Volt AC |
| Phase | Single-Phase |
| Magnetic Starter | Yes |
| Amp Draw | Consult Certified Electrician |
| Recommended Breaker | Consult Certified Electrician |
Engine
| HP | 7.5 |
Pump
| CFM | 23 |
| CFM Rated @ | 100 PSI |
| Pump Material | Solid Cast Iron |
| Max PSI | 175 PSI |
| Oil Sight Glass | Yes |
| Pump Type | Two-Stage |
| After Cooler | Yes |
| Pump Drive | Belt Drive |
| Oil Type | Oil Lubricated |
| Oil System | Splash Lubrication |
| Pump Low Oil Shut-off | Yes |
Tank
| Tank Size | 80 Gallons |
| Tank Outlet | 3/4 Inch |
| Electronic Drain Valve | No |
| Tank Orientation | Vertical |
Accessories
| Pressure Gauge | Yes |
| Air Dryer | No |
Overview
| Weight | 580 Pounds |
| Certification | ASME |
| Consumer Warranty | 2 Year |
| Commercial Warranty | 2 Year |
| Product Length | 37 Inches |
| Product Width | 24 Inches |
| Product Height | 72 Inches |
| Power Type | Electric |
Downloads
Brochure
Manual
Warranty
