BendPak

BendPak HDS-14LSXE: the alignment rack with thirty inches added, plus rolling jacks and the airline kit This is the long-wheelbase version of ...

HDS-18E: buying 9 tons of lift because 9 tons is what you lift Most heavy-duty four-post lifts are sold by pointing at the biggest number in t...

HDS-18EA: aligning a truck without ever taking the weight off its suspension The reason the HDS-18EA is an alignment lift rather than a four-p...

HDS-27: four cables, each rated to break at 14,000 lbs When a 27,000 lbs refuse truck is in the air, the entire question is the cable. The HDS...

BendPak HDS-27X Four-Post Heavy-Duty Lift, Extended Runways The HDS-27X is the one lift in this series whose runways can be set at two differe...

BendPak HDS-40 Four-Post Heavy-Duty Lift Buy a 40,000 lb lift and you are really buying its failure behaviour, because that is the part you wi...

BendPak HDS-40X Four-Post Heavy-Duty Lift, Extended Runways The number on the box is 40,000 lbs. The number that decides whether your truck ca...

BendPak HDSO14AX: an open-front alignment lift built around 10.5" cable sheaves Four-post lifts do not usually fail at the columns. They fail ...

BendPak HDSO14AX open-front alignment package, with the rolling jacks and the air line to feed them An alignment rack is the easy half of the ...

The front cross bar is missing, and that is the entire point On a conventional four-post lift a steel bar runs between the two front columns. ...

BendPak 10APX-181: a forged-steel arm restraint rated to hold 2000 pounds sideways The most likely thing to go wrong on a two-post lift is not...

16AP-192: an extended-height beam, and the adapter set already in the crate Two things separate the 16AP-192 from the standard-height lift it ...

A four-post lift tall enough to store a boat above a car Most four-post lifts stop rising at about the height of a tall man. The HD-7500PBX ke...

Four Parallelogram Support Bars Per Platform — Which Is How a Low-Rise Lift Reaches 10,000 lbs Low-rise lifts are usually the compromise you ...

BendPak LR-60 Low-Rise Lift The LR-60 is the fixed-position member of BendPak's low-rise family: a 6,000 lb scissor lift, 70.5" (1,791 mm) acr...

BendPak LR-60P Portable Low-Rise Lift The letter that matters here is the P. The LR-60P is the low-rise scissor lift built to be moved — high-...

BendPak MD-6XP Portable Mid-Rise Frame Lift The MD-6XP is a 6,000 lb mid-rise scissor lift that engages the vehicle's frame, rides on its own ...

BendPak MDS-6EXT: 78.7 in. platforms, because the lift points moved outboard The reason this model exists is a measurement. Standard mid-rise ...

BendPak MDS-6LP: three published working heights, not just "up" A mid-rise scissor lift is bought to put a car at the height that suits the jo...

BendPak MDS-6LPF: a flush-mount lift, and the honest arithmetic of recessing one Flush-mount lifts are sold on the floor they leave behind — d...

BendPak MDS-6EXTF: the rise is a menu, and BendPak publishes all three heights Most lifts give you one rise figure. The MDS-6EXTF is specified...

BendPak MLS-18 Mobile High Jack Stand The MLS-18 is a tripod jack stand rated at 18,000 lbs, built for the job a two-post lift cannot do on it...

BendPak Mobi-EVS Multi-Point Support Kit Most lifting-table accessories are shaped around one component. This one is shaped around the awkward...

BendPak Mobi-EVS Transmission Support Read this before you order: it is an adapter, not a jack. The Mobi-EVS Transmission Support is a saddle ...