BendPak

BendPak 12APX-192 12,000 lb Two-Post Lift, Extended Height Ask a technician what actually frightens them about a two-post lift and it is rarel...

BendPak 20AP-192 Two-Post High-Rise Lift, Extended Height The decision most buyers of a two-post lift get wrong is the drive-through width, an...

Metric dies, in the sizes metric tube actually comes in: 38, 42, 45, 48, 51 and 60 mm This is BendPak's digital automatic bender supplied with...

A battery table that runs on its own battery The EVS3000 is a mobile scissor lift table for dropping and refitting electric-vehicle battery pa...

BendPak EVS4500 Mobile EV Battery and Powertrain Lift Table The detail that makes the EVS4500 an EV tool rather than a heavy scissor table is ...

BendPak HD-7500BLX: the capacity depends on the wheelbase, and BendPak publishes the numbers Storage lifts get sold on one number. This one co...

Long runways, because a trailer is longer than a car The runways on the HD-75BXT measure 206.25" (5,239 mm). That is substantially longer than...

The number that decides your car: minimum wheelbase, published four ways Rated capacity on a four-post lift assumes the vehicle is long enough...

31 locking positions, which is the spec that makes a tall lift useful A four-post lift that rises high is only as good as the heights it will ...

The runways move: 35 in. apart for a sports car, 41 in. for a truck A four-post lift is usually sold on capacity and length, and then you find...

The HD-9 Is the Short One — and That Is Why Most Garages Can Take It Every four-post lift in the 9,000 lb class raises roughly the same weigh...

HD-973PX: the triple stacker built around long vehicles, not average ones The HD-973PX is the version of this three-level parking lift you buy...

BendPak HD-9AE 9,000 lb. 4 Post Alignment Lift An alignment lift built as one, not converted into one Plenty of four-post lifts can be made to...

17 lock positions, every 4 in. up a 100 in. post Most four-post lifts give you a handful of parking heights and you learn to live with them. T...

The Smallest Four-Post Footprint Here — and Still an Open-Centre Service Lift The BendPak HD-9ST is the narrow-width member of the 9,000 lb f...

The Narrowest Footprint in the 9,000 lb Four-Post Range — With the Full Rise Most narrow four-post lifts buy their small footprint by giving ...

BendPak HD-9SW 9,000 lb Super-Wide Four-Post Storage Lift The specification that decides whether a storage lift is any use to an enthusiast is...

BendPak HD-9SWX Super-Wide, Extended-Length Four-Post Lift Most four-post lift pages sell you the capacity. The number that actually decides w...

Long Runways, Low Columns: The HD-9XL Is Built for Wheelbase, Not Ceiling The BendPak HD-9XL is the extended-length member of the 9,000 lb fo...

The HD-9XW Buys You Height, Not Floor Space The BendPak HD-9XW is a 9,000 lb four-post lift built around a single decision: raise the runways...

BendPak HDS-14 14,000 lb. 4 Post Lift 14,000-lb. Capacity / Four-Post Lift / Standard Length BendPak HDS-14: 10.5 in. sheaves on 2.25 in. a...

BendPak HDS-14LSX 14,000 lb Four-Post Alignment Lift The parts of a four-post lift that decide how long it lasts are the ones nobody photograp...

BendPak HDS-14LSX package: one bay that does alignment and everything else Most shops that buy an alignment rack already own a service lift, a...

BendPak HDS-14LSXE Limo-Extended Four-Post Alignment Lift Buy most four-post lifts and you get a lift. Buy the HDS-14LSXE and the alignment ha...