Ranger Clip-On Steel Wheel Weight Coated - 1.25 Oz - 25 Pcs

Of the coated clip-on sizes we list, this is the one that arrives with its paperwork. A brochure, a manual and the warranty document are all published against this part and linked further down the page — which sounds like a small thing until you are the person being asked to evidence what you fitted to a customer's wheel. For a consumable that most suppliers ship with no documentation whatsoever, that is a genuine difference.

Documentation you can actually point at

Wheel weights are bought by the box and forgotten. They are also, occasionally, the subject of a question nobody planned for: a fleet customer asking what was fitted, an environmental audit asking about sourcing, a wheel manufacturer's warranty programme asking whether an approved weight type was used. When that happens, the difference between a supplier who can produce a document and one who cannot is the difference between an email and an afternoon.

The brochure and manual tiles on this listing are worth opening once before you file the box on a shelf. If you need the warranty text specifically, it is published there too, and we can send the current copy on request.

An intermediate step, and why it earns shelf space

An ounce and a quarter is a genuinely useful correction size. It is large enough to resolve the kind of imbalance a normally worn tire and wheel assembly actually produces, and small enough that it does not overshoot into a correction the machine then asks you to trim back. Sizes at the extremes get bought reflexively; the intermediate steps are the ones that quietly keep a bay moving, because they are the ones that let a technician fit a single weight at the exact angular position called for and be finished.

The alternative — building the number out of two smaller pieces — spreads the correction across a wider arc of the flange, adds a second clip that can be knocked off, and looks like what it is on a wheel a customer paid attention to.

Retention: what is actually holding it on

A clip-on weight is held by spring tension in a formed steel clip that hooks over the rim flange, and nothing else. There is no adhesive and no fastener. That single point of retention is why the seating step matters so much: the clip has to be driven fully over the flange with a wheel weight hammer so the body sits flat, because a weight that is only partly seated is carrying its load on the tip of the clip rather than across it.

Once properly seated, the arrangement is robust in exactly the way the job requires. It tolerates the vibration and impact loads of ordinary road use, it does not care about temperature, and it will not creep in summer heat the way an adhesive pad can. It can also be removed and repositioned instantly with no residue, which is the practical reason clip-on remains the default for steel wheels and any alloy with a suitable flange.

Coating, and the reason it is not just cosmetic

The coating over the steel does the obvious job of looking tidier against a wheel finish and of softening the contact where the clip bears on the rim. It also does a job that only shows up years later. A bare steel weight on a wheel takes road salt, standing water, brake dust and wash chemicals continuously, and once it starts to corrode the rust layer pushes the clip open from within, relaxing the tension that is the only thing keeping the weight on the car. Delaying corrosion is therefore a retention measure as much as an appearance one, and it is why the coated weight is worth the small premium over bare.

Will it fit your wheels?

The style is listed as Clip-on / Pfe. That names a clip profile, and profiles are matched to the cross-section of the rim flange rather than to a vehicle. A weight whose profile is nearly right will not sit flush, and one that sits proud is permanently loaded, trying to spring off the rim. If your bay runs a broad mix of steel and alloy wheels and you are unsure which profile suits them, ask us before ordering a box of any size.

Perfect For

• Shops that keep records and want a consumable with published documentation behind it.
• General tire and service bays needing a dependable mid-range correction size in stock at all times.
• Fleet workshops balancing large numbers of similar wheels where the same correction size comes up repeatedly.
• Mobile fitters building out a full ladder of sizes rather than carrying only the extremes.

What's in the Box

Twenty-five coated clip-on steel weights, all of the same size, with a packed weight of 1.95 lbs. A wheel weight hammer and a clean rim flange are the only other things required to fit them.

Specifications

Compliance and certification, stated plainly

Lead content in wheel weights is restricted under national environmental rules and by several state programmes, which makes sourcing a legitimate question rather than a technicality. This listing's own published data does not carry a statement about lead content, and it claims no independent laboratory certification — so neither claim is made here on its behalf. What it does carry is the documentation referenced above, which is the right place to look. If you need to evidence compliant sourcing formally, ask us for the manufacturer's paperwork against this part number before ordering.

Shipping and delivery

A box of these travels as a small parcel rather than freight, shipped within the lower 48 states. Inspect the carton at the door: crushing or an open seam should be written onto the carrier's paperwork before you sign, because a note recorded at delivery is what makes a damage claim straightforward later. Collection from the Ranger pick-up locations shown further down this page is available as an alternative.

Warranty

The warranty document Ranger publishes is what governs a claim, not a summary written on a store page, so no term is restated here — and on this listing that document is linked directly. If a box turns up with deformed clips, contact us before bending them back; a reworked clip cannot be assessed, and reshaping it will normally end the claim.

Contact us for more information.