"Better" Level Car and Truck Lifts

BendPak HDS-14LSXE Limo-Extended Four-Post Alignment Lift Buy most four-post lifts and you get a lift. Buy the HDS-14LSXE and the alignment ha...

BendPak LR-60P Portable Low-Rise Lift The letter that matters here is the P. The LR-60P is the low-rise scissor lift built to be moved — high-...

BendPak HD-9SW 9,000 lb Super-Wide Four-Post Storage Lift The specification that decides whether a storage lift is any use to an enthusiast is...

31 locking positions, which is the spec that makes a tall lift useful A four-post lift that rises high is only as good as the heights it will ...

BendPak HD-7500BLX: the capacity depends on the wheelbase, and BendPak publishes the numbers Storage lifts get sold on one number. This one co...

BendPak 2 Post Lift PL-6000DCX 6,000 lb BendPak PL-6000DCX Two-Post Parking Lift The engineering decision that defines this lift is wh...

BendPak MDS-6EXTF: the rise is a menu, and BendPak publishes all three heights Most lifts give you one rise figure. The MDS-6EXTF is specified...

17 lock positions, every 4 in. up a 100 in. post Most four-post lifts give you a handful of parking heights and you learn to live with them. T...

A four-post lift tall enough to store a boat above a car Most four-post lifts stop rising at about the height of a tall man. The HD-7500PBX ke...

16AP-192: an extended-height beam, and the adapter set already in the crate Two things separate the 16AP-192 from the standard-height lift it ...

BendPak 16AP: nothing on the carriages to grease, for the life of the lift Ask any workshop what actually goes wrong with a two-post lift afte...

BendPak 12AP-SRT: a 12,000 lb two-post lift that deliberately stops at working height Almost every two-post lift is sold on how far up it goes...

BendPak 10APX-181: a forged-steel arm restraint rated to hold 2000 pounds sideways The most likely thing to go wrong on a two-post lift is not...

BendPak 10APX: arms that retract to 22 in. and reach out to 57 in. Two-post lifts are compared on capacity, and capacity is rarely the thing t...

A 93.5 in. post, so a full-capacity two-post lift fits a garage that cannot take one Every argument about two-post lifts eventually comes back...

BendPak PCL-18B-8 — Eight Columns, or Two Independent Fours The argument for eight columns is not really the biggest vehicle you can lift. It ...

BendPak PCL-18B-8, Low Voltage — the Eight-Column Set for a Standard Shop Supply This package exists for a specific and very practical reason:...

BendPak PCL-18B-6 Mobile Column Lifts, Set of Six The PCL-18B-6 is a six-column mobile lifting system for three-axle trucks, buses, refuse veh...

BendPak PCL-18B-6 — Six Columns, Built From Parts You Can Buy Here is the detail on this lift that almost no competing column set can match, a...

BendPak PCL-18B-4 Mobile Column Lifts, Set of Four — High Voltage The thing that separates these columns from a screw-drive mobile lift is whe...

BendPak PCL-18B-4 Mobile Column Lifts, Set of Four Four columns is the standard working set, and BendPak's cabling is the reason this configur...

BendPak PCL-18B-2 Mobile Column Lifts, Pair — High Voltage Read this first, because it is the thing most likely to cause a bad purchase: a pai...

BendPak PCL-18B-2 Mobile Column Lifts, Pair — Low Voltage The feature on these columns that nobody thinks about until they need it is the manu...

When it is down, the floor is just floor The SP-7XEF is the flush-mount member of this scissor family, and the whole argument for it is what y...