"Better" Level Car and Truck Lifts

AMGO OH-9: one of the few lifts at this level that tells you its warranty term Go and read ten two-post lift listings. Most link a warranty do...

AMGO OHX-10: a 10,000 lb clear-floor lift built from one-piece columns Two-post columns are usually shipped in sections and bolted together on...

AMGO OHX-10H: the 10,000 lb clear-floor lift that adjusts to the bay in three directions Most two-post lifts are a fixed shape. You measure yo...

Three published rise figures, because how high it goes depends on what you stack on the arms Most two-post lifts are sold on one rise number. ...

Atlas Garage PRO9000: The Portable Four-Post That Can Still Get the Wheels Off A four-post lift holds a vehicle by its tires, which is excelle...

One Lift, Two Widths: The Expandable Top Beam Is the 10AP's Real Feature Most two-post lifts force a decision you cannot undo. Order the narro...

The front cross bar is missing, and that is the entire point On a conventional four-post lift a steel bar runs between the two front columns. ...

Challenger Lifts SA10 Asymmetric — a 10,000 lb two-post you size at installation Most two-post lifts arrive as one width and one height and yo...

Atlas APEX9 — a certified lift that is not bolted to your floor Free-standing four-post lifts and independent safety certification do not usua...

BendPak 10AP-168: the one decision you make once, and cannot revise Nearly everything about a two-post lift can be changed later. Arms adjust,...

BendPak 2 Post Car Lift 10AP Pro Series 10,000‐lb Capacity The Pro-Series difference is in the crate: frame cradle pads and adapter pins come ...

The number that decides whether a high-roof van fits is 175.5 in., not 181 in. The BendPak 10APX-181 is the tall-beam member of the 10AP two-p...

Challenger Lifts SA10 Symmetric — 10,000 lbs, balanced between the columns The SA10 in symmetric configuration places the vehicle centred betw...

BendPak 10APX-181: a forged-steel arm restraint rated to hold 2000 pounds sideways The most likely thing to go wrong on a two-post lift is not...

BendPak 10APX: arms that retract to 22 in. and reach out to 57 in. Two-post lifts are compared on capacity, and capacity is rarely the thing t...

Atlas ATTD-412: a 12,000 lb four-post lift with nothing standing between the runways Look at a four-post lift from the front and you learn mos...

Atlas Platinum PVL14 — the power unit is the part worth reading about Most four-post lifts in this class are described by their capacity and no...

Atlas ATTD-414 — sized for duallies, and the numbers to prove it The ATTD-414 is a 14,000 lb commercial four-post, and what actually distingui...

BendPak 2 Post Lift 10AP-168 10,000 lb. One part number, two bay layouts — and you choose once The BendPak 10AP-168 ships with an expandable ...