BENDPAK Car Lifts

BendPak Mobi-EVS Multi-Point Support Kit Most lifting-table accessories are shaped around one component. This one is shaped around the awkward...

BendPak Mobi-EVS Transmission Support Read this before you order: it is an adapter, not a jack. The Mobi-EVS Transmission Support is a saddle ...

BendPak 2 Post Lift 10AP-168 10,000 lb. One part number, two bay layouts — and you choose once The BendPak 10AP-168 ships with an expandable ...

Long runways, because a trailer is longer than a car The runways on the HD-75BXT measure 206.25" (5,239 mm). That is substantially longer than...

A Pair of These Covers a 50,000 lb Vehicle — the Reason This Model Exists The BendPak RBJ25000 is the highest-capacity rolling bridge jack in...

Rated for More Than Half the Vehicle — Which Is the Only Way to Handle an Offset Load The BendPak RBJ18000 is an 18,000 lb rolling bridge jac...

The One With an Adjustable Support Base — 45.75" to 59" The specification that sets the BendPak RBJ15000 apart from the rest of the rolling b...

Product Description BendPak RJ9W Rolling Bridge Jack The RJ9W is the heavy end of BendPak's rolling bridge jack range: an air-hydraulic jack t...

BendPak RJ6W Rolling Bridge Jack Among BendPak's rolling bridge jacks, the RJ6W is the one that gets out of the way. Its pads sit just 1.25" (...

BendPak HDSO14AX: an open-front alignment lift built around 10.5" cable sheaves Four-post lifts do not usually fail at the columns. They fail ...

BendPak HDS-40 Four-Post Heavy-Duty Lift Buy a 40,000 lb lift and you are really buying its failure behaviour, because that is the part you wi...

BendPak HDS-27X Four-Post Heavy-Duty Lift, Extended Runways The HDS-27X is the one lift in this series whose runways can be set at two differe...

HDS-27: four cables, each rated to break at 14,000 lbs When a 27,000 lbs refuse truck is in the air, the entire question is the cable. The HDS...

HDS-18EA: aligning a truck without ever taking the weight off its suspension The reason the HDS-18EA is an alignment lift rather than a four-p...

HDS-18E: buying 9 tons of lift because 9 tons is what you lift Most heavy-duty four-post lifts are sold by pointing at the biggest number in t...

BendPak HDS-14LSX 14,000 lb Four-Post Alignment Lift The parts of a four-post lift that decide how long it lasts are the ones nobody photograp...

BendPak HD-9AE 9,000 lb. 4 Post Alignment Lift An alignment lift built as one, not converted into one Plenty of four-post lifts can be made to...

74.4 in. long, and none of it above the floor The BendPak P-9000LTF is the flush-mount member of this low-rise family, and the number that exp...

Four published lock heights, so the car sits where the job wants it A low-rise lift that only goes up and down is a jack with ambitions. The B...

BendPak MDS-6LP: three published working heights, not just "up" A mid-rise scissor lift is bought to put a car at the height that suits the jo...

BendPak LR-60 Low-Rise Lift The LR-60 is the fixed-position member of BendPak's low-rise family: a 6,000 lb scissor lift, 70.5" (1,791 mm) acr...

Four Parallelogram Support Bars Per Platform — Which Is How a Low-Rise Lift Reaches 10,000 lbs Low-rise lifts are usually the compromise you ...

The number that decides your car: minimum wheelbase, published four ways Rated capacity on a four-post lift assumes the vehicle is long enough...

Product Description BendPak BB-2 Blue-Bullet Pipe Bender with Deluxe 302 Die Package Calling this a pipe bender undersells half of it. The BB-...