All Products

Hofmann GEODYNA 7340P High Volume Wheel Balancer Every other GEODYNA balancer we stock clamps the wheel with a quick nut that an operator tigh...

Hofmann designed the 7200S to be installed close to a wall. That is a listed feature, not an inference, and the cabinet backs it up: 31" deep ...

QuickJack 6000ELX Super-Long Portable Car Lift The 6000ELX is the long-frame machine in the QuickJack portable range, and the frame length is ...

Tuxedo SC-2K: one column, and the floor underneath stays yours Most storage lifts ask you to give up the floor. Four posts, two runways, ramps...

Tuxedo M-2200IEH-XR: the ramp gets out of your way, and so do your hands Almost every motorcycle bench in this class is bought and then quietl...

Product Description Tuxedo LR-26-PAD: a 6,000 lb low-rise you can actually drive a low car onto The number that decides whether a low-rise lif...

Tuxedo DMCS-1000: the capacity is 1,500 lb at the bottom and 400 lb at the top, and you should know which one you are using Every listing for ...

An alignment rack, not a four-post with turnplate holes cut in it What separates the Tuxedo FP14KA-C from an ordinary four-post is the hardwar...

Tuxedo WB-953-B Wheel Balancer Balancer accuracy is decided at the shaft, not at the screen. The WB-953-B is built on a 36 mm balancing shaft w...

Valor TC-950: the machine that never touches the rim Every tyre shop has a story about a customer's alloy wheel and a mounting head. It is the ...

Dannmar DT-50 Tire Changer and DB-70 Wheel Balancer — With 1,400 Tape Wheel Weights Most changer-and-balancer packages sell you the two machin...

BendPak HDSO14AX: an open-front alignment lift built around 10.5" cable sheaves Four-post lifts do not usually fail at the columns. They fail ...

BendPak HDS-40 Four-Post Heavy-Duty Lift Buy a 40,000 lb lift and you are really buying its failure behaviour, because that is the part you wi...

BendPak HDS-27X Four-Post Heavy-Duty Lift, Extended Runways The HDS-27X is the one lift in this series whose runways can be set at two differe...

HDS-27: four cables, each rated to break at 14,000 lbs When a 27,000 lbs refuse truck is in the air, the entire question is the cable. The HDS...

HDS-18EA: aligning a truck without ever taking the weight off its suspension The reason the HDS-18EA is an alignment lift rather than a four-p...

HDS-18E: buying 9 tons of lift because 9 tons is what you lift Most heavy-duty four-post lifts are sold by pointing at the biggest number in t...

BendPak HDS-14LSX 14,000 lb Four-Post Alignment Lift The parts of a four-post lift that decide how long it lasts are the ones nobody photograp...

BendPak HD-9AE 9,000 lb. 4 Post Alignment Lift An alignment lift built as one, not converted into one Plenty of four-post lifts can be made to...

74.4 in. long, and none of it above the floor The BendPak P-9000LTF is the flush-mount member of this low-rise family, and the number that exp...

Four published lock heights, so the car sits where the job wants it A low-rise lift that only goes up and down is a jack with ambitions. The B...

BendPak MDS-6LP: three published working heights, not just "up" A mid-rise scissor lift is bought to put a car at the height that suits the jo...

BendPak LR-60 Low-Rise Lift The LR-60 is the fixed-position member of BendPak's low-rise family: a 6,000 lb scissor lift, 70.5" (1,791 mm) acr...

Four Parallelogram Support Bars Per Platform — Which Is How a Low-Rise Lift Reaches 10,000 lbs Low-rise lifts are usually the compromise you ...