All Products

Product Description Topdon USA Toyota-RCW (LAC04-25) Diagnostic Accessory Toyota-RCW accessory for the Phoenix Mobile ADAS. Downloads ...

Topdon USA VW-AVM (LAC04-04) Diagnostic Accessory VW-AVM accessory for the Phoenix Mobile ADAS.

Product Description Topdon USA Honda-Lane Watch (LAC04-17) Diagnostic Accessory Honda-Lane Watch accessory for the Phoenix Mobile ADAS. ...

Topdon USA VW Lidar Target (LAC05-06) Diagnostic Accessory VW Lidar Target accessory for the Phoenix Mobile ADAS.

iDEAL PTDT-1000: 2.38mm steel rated for 1,000 lbs, with the drain built in This is the tear-down bench for a shop that already owns a parts wa...

iDEAL MSC-18K-X-6108 Mobile Column Lift - Set of Six Six columns can stand up to 32'8" apart. That single figure is what separates this set f...

iDEAL MSC-18K-X-472 Mobile Column Lift - Set of Four Every column in this set locks by itself and stops by itself. There is an independent me...

MSC-18K-X-236: a 36,000 lbs column pair that runs off its own batteries This is a set of two iDEAL mobile columns rated 36,000 lbs as a pair, ...

Product Description iDEAL MSC-13K-B-678 - a six-column mobile lifting set Synchronisation on this set is handled by a Siemens PLC working wit...

Product Description iDEAL MSC-13K-B-452 mobile column lifting set One technician can put this lift where it needs to go. Each column moves on...

Product Description iDEAL FP14KC-X: a 14,000 lb four-post you set up around the vehicles you actually work on Most four-post service lifts arr...

iDEAL IWA-60-8500-HD-K multi-axle 3D truck aligner No vehicle lift required. That single line is the whole proposition of this system: it is ...

Tuxedo TC-400M-B Powersport Tire Changer The TC-400M-B is a tire changer built around small wheels rather than adapted to them. Its clamps clo...

iDEAL TC-400M-B-PL230-K: one table that clamps a 6" wheel and a 24" wheel The awkward thing about powersport work is the range. A dirt bike wh...

Product Description iDEAL TC-400M-B: a powersport tire changer that runs on a wall outlet and shop air The TC-400M-B-IDEAL is built around the...

Product Description FR-77T-20: tubular deck, two telescoping towers, 20' of bench A tubular deck is an open lattice rather than a solid plate,...

FR-77-20: a solid steel plate deck you can anchor almost anywhere on The specification line that separates this machine from the rest of the F...

iDEAL PSB-SEMIDD26B-AK semi down draft spray booth Read the fan specification on a spray booth before you read the airflow number. This one i...

PSB-AFCF23B-AK: a cross-draft booth with tilt panels, built to be lit properly Cross-draft is the airflow pattern most collision shops actuall...

PSB-AFOFB1388-AK: an open-front booth you can service from the inside An A-frame open front booth has no doors. Air is drawn in across the who...

PSB-PMR1088-AK: a mixing room that can be built either way round A paint mixing room is not a small spray booth. Its job is to take the one ac...

Product Description iDEAL PSB-PSMCT: stainless steel, a lockable cabinet, and it arrives assembled Two things separate this mixing station fro...

iDEAL BCS-3000: a 3,000 lbs body cart that breaks down into two bundles when the job ends The specification that decides this purchase is not ...

iDEAL BCA-3000: three sets of adapters in the box, and a deck that sets its own working height Most body carts are a frame with casters, and y...