Product Description
Dannmar’s D4-9X features runway lengths of 198”, and it’s rated to lift a stout 9,000 lbs. Plus the D4-9X comes with a list of standard features that cost extra on other makes and models.
The Dannmar D4-9X Four-post lift easily handles the bigger stuff. This lift features useful 198” runways, which are longer than most drive-on four-post lifts, and easily raises a heavy 9,000 lbs., thus handling just about all long wheelbase pickup trucks. With these impressive specs you have a lift that exceeds what’s dimensionally needed because most crew cabs with a standard or long box have wheelbase lengths from 160 to 175” and tip the scales at or above 5,500 lbs.
Looking for more vertical space too? With an 9-foot ceiling, the Dannmar D4-9X lift makes use of all that upper space you’re currently not using. This four-post lift might also serve to provide a vehicle maintenance and parking solution that allows you to maximize your fixed square footage of floor space. Dannmar’s D4-9X also comes standard with a wheel caster kit that allows rolling lift mobility, plus drip trays and easy-to-approach aluminum ramps. Dannmar D4-9X Four-post lifts work great for lifting long wheelbase pick-up trucks, storing cars, ATVs, snowmobiles, jet skis, golf carts and just about anything with four wheels.
Product Features
- CE Approved and Certified
- Meets or exceeds the standards prescribed by European Standard EN-1493
- Mid to long-style approach ramps for low-ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Heavy-duty 1/2” aircraft cable and 1.75” roller axles
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Large self-lubricating cable rollers
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 6,000-lb. capacity rolling jacks available to raise front or rear of vehicle
- ETL approved
Product Specifications
Capacity
| Lifting Capacity: | 9,000 lbs |
| Max. Capacity / Front Axle: | 4,500 lbs |
| Max. Capacity / Rear Axle: | 4,500 lbs |
Rise
| A: Minimum Height | 5" (0.41 ft.) |
| B: Max. Rise (Under Runway) | 82" (6.83 ft.) |
| C - Max. Lifting Height: | 87" (7.25 ft.) |
| Lifting Time: | 60 Seconds |
Outside Dimensions
| F - Overall Width: | 114 1/2" (9.54 ft.) |
| H: Overall Length | 227" (18.91 ft.) |
| I: Outside Length | 200 1/2" (16.70 ft.) |
Inside Dimensions
| G - Width Between Columns: | 98" (8.16 ft.) |
| E: Drive-Thru Clearance | 86" (7.16 ft.) |
Runways
| M - Runway Width | 18 3/4" (1.56 ft.) |
| N - Runway Length | 189 3/4" (15.81 ft.) |
| J: Width Between Runways | 37 1/2" (3.12 ft.) |
| K: Outside Edge of Runways | 72 1/2" (6.04 ft.) |
Power Unit
| Motor: | 110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A |
Shipping
| Weight: | 2,420 lbs |
| Dimensions (LxWxH): | 189" x 22" x 41" |
Pick Up and Delivery
Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions. 866-774-7743
Downloads
Brochure
Manual
Warranty
