BendPak HD-9STX 9,000 lb 4 Post Storage Lift

SKU/Product #: 5175862

BendPak

Write a review
$5,195.00


Free Shipping
7-10 Business Days
Shipping Calculated at Checkout
7-10 Business Days
Power Options
Pick Up and Save

Product Description

The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.

More Height in Less Floor Space

The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.

With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.

Product Features

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Narrow-width
  • High-rise
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric-hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles available
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

Product Specifications

Capacity

Lifting Capacity: 9,000 lbs
Max. Capacity / Front Axle: 4,500 lbs
Max. Capacity / Rear Axle: 4,500 lbs

Rise

A - Minimum Height 4 1/2" (0.375 ft.)
B - Max. Rise (Under Runway) 82" (6.83 ft.)
C - Max. Lifting Height: 86 1/2" (7.20 ft.)
Lifting Time: 50 Seconds

Outside Dimensions

D - Overall Width: 110 1/4" (9.18 ft.)
F - Overall Length (Inc.Ramps) 224" (18.66 ft.)
E - Overall Length (No Ramps) 198" (16.5 ft.)

Inside Dimensions

H - Width Between Columns: 89 3/4" (7.47 ft.)
I - Drive-Thru Clearance 76 1/2" (6.375 ft.)

Runways

J - Runway Width 19" (1.58 ft.)
K - Runway Length 188" (15.66 ft.)
L: Width Between Runways 37 1/2" (3.125 ft.)

Locking

Locking Positions: 15
Lock Spacing: Every 4"

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph


Shipping

Weight: 1,782 lbs
Dimensions (LxWxH): 190" x 22" x 35"

Pick Up and Delivery

Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.

Call, text, or chat with us if you have questions.

 

Downloads

Brochure
Manual
Warranty
 
0 0 Reviews

Reviews