DANNMAR D4-12A 12,000 lb. Alignment Lift

SKU/Product #: 5175318

Dannmar

$7,835.00

Pay With 12 Month 0% Financing
OR

Shipping Info

At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.

I Have The Equipment To Unload My Order
  • Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.‍Aspects to keep in mind when choosing this option.
  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
  • In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

Aspects to keep in mind when choosing this option.

   1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.

   2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

Aspects to keep in mind when choosing this option.

   1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)

   2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Related Products

Product Description

Dannmar’s D4-12A 12,000 lb. capacity alignment lift utilizes industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance.

Dannmar’s 12,000 lb. capacity alignment lift is two lifts in one. That’s because it works as an alignment system and a car lift. Dannmar’s utilized industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance.

This is the sturdy alignment lift for most shops, especially if you service large, low ground-clearance vehicles. Dannmar’s alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with free-floating and no resistance.

Dannmar’s D4-12A four-post alignment lift utilizes multi-caster slip plates in the rear and turn plates in the front that allow for very precise alignments. These turn plates also provide more clearance for equipment installations. The lift can otherwise be used for most repairs and vehicle or light to medium weight truck storage. With a lift like the Dannmar D4-12A, shops can free up extra floor space or increase parking capacity.

The Dannmar D4-12A alignment lift comes standard with robust 10.5” diameter dual-hub cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles. A heavy-duty 1/2” diameter aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions from weather, chemicals, and hydraulic oil. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service. Other features include electric/hydraulic power, push button pneumatic lock release, adjustable height locking positions, an optional rolling bridge jack, and more.

Product Features

  • 12,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Heavy-duty turn plates and integrated rear slip-plates
  • Multi-position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal “Anti-Sway” slider blocks in each column
  • Oversize sheaves and heavy-duty 1/2” aircraft cable
  • Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
  • Multi-position safety locks in each column with push-button safety release
  • Runways adjust for different tread widths and feature non-skid surface
  • Optional 6,000-lb. capacity bridge jacks available
 

Product Specifications

Capacity

Lifting Capacity: 12,000 lbs
Max. Capacity / Front Axle: 6,000 lbs
Max. Capacity / Rear Axle: 6,000 lbs

Rise

A: Minimum Height 9 1/2" (0.79 ft.)
D: Max. Rise (Under Runway) 49" (4.08 ft.)
C - Max. Lifting Height: 78" (6.5 ft.)
Lifting Time: 60 Seconds

Outside Dimensions

G - Overall Width: 127 1/2" (10.62 ft.)
I - Overall Length 233 1/2" (19.45 ft.)
J: Outside Length 194 3/4" (16.22 ft.)

Inside Dimensions

H - Width Between Columns: 115 3/4" (9.64 ft.)
F: Drive-Thru Clearance 98" (8.16 ft.)

Runways

N - Runway Width 20" (1.66 ft.)
O - Runway Length 194 3/4" (16.22 ft.)
K: Width Between Runways 34 1/2" or 41 1/2" (2.87 ft. or 3.45 ft.)
M: Outside Edge of Runways 74 1/2" or 81 1/2" (6.20 ft. or 6.79 ft.)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph

Shipping

Weight: 2,882 lbs
Dimensions (LxWxH): 201" x 24" x 47"

Pick Up and Delivery

Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.

Call, text, or chat with us if you have questions. 866-774-7743

 

Downloads

Brochure
Manual
Warranty
 
0 0 Reviews
Write a Review

Reviews