BendPak RBJ15000 15,000-lb. Capacity Rolling Bridge Jack

SKU/Product #: 5175031

BendPak

Write a review
$4,745.00 $4,745.00
$4,995.00

Free Shipping
7-10 Business Days
Shipping Calculated at Checkout
7-10 Business Days
Power Options
Pick Up and Save
Checkout Today with Financing
12 Month 0% Financing
Pay in 12 Installments of

Shipping Info

At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.

I Have The Equipment To Unload My Order
  • Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.‍Aspects to keep in mind when choosing this option.
  • The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
  • Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
  • You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
  • Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
  • There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
  • In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.

Aspects to keep in mind when choosing this option.

   1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.

   2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.

You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.

Neither of the above delivery options suits you? Then we have the solution.

We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.

Aspects to keep in mind when choosing this option.

   1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)

   2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).

Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Product Description

BendPak RBJ15000 15,000-lb. Capacity Rolling Bridge Jack

Our 15,000-lb. capacity bridge jack is made just for the HDS-27 four-post lift. This particular car lift is truly made for massive trucks and commercial equipment. Check out the RBJ15000 jack if you need to perform full wheel service on heavy-duty vehicles.

Lift 15,000 lbs. for Full Wheel Service Capability

The RBJ15000 bridge jack is capable of lifting half of a 30,000-lb. truck or commercial bus. The HDS-35 four-post car lift is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can’t get to the wheels. A rolling bridge jack opens the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment.

Steel contact pads

BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars.

High-pressure hydraulic power unit

The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak’s exclusive, optional airline kit.

Three lock levels

Raise your jack to three different heights—whatever is most comfortable for you. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy. Rolling bridge jacks also give a little more raise for extra undercarriage clearance and comfort.

Product Features

  • 15,000-lb. lifting capacity
  • Steel lifting pads standard
  • High-pressure hydraulic power unit
  • Optional air-line kit

Product Specifications

Lifting Capacity 15,000 lbs. (6,804 kg)
Suitable Lift Model(s) HDS-27 Series, HDS-40 Series

Min. Drive-Over Height

Short Arm Pad 9" (229 mm)
Short Top Pad 10" (254 mm)
Tall Arm Pad 11" (279 mm)
Tall Top Pad 12" (305 mm)

Max. Lifting Height

Short Arm Pad 19" (483 mm)
Short Top Pad 20" (508 mm)
Tall Arm Pad 21" (533 mm)
Tall Top Pad 22" (559 mm)

Reach

Support Base Width 45.75" (1,162 mm) - 59" (1,499 mm)
Max. Arm Pad Reach 63.75" (1,619 mm)
Min. Arm Pad Reach 48.5" (1,232 mm)
Max. Top Pad Reach 39.5" (1,003 mm)
Min. Top Pad Reach 7.75" (197 mm)

Time to Full Rise 55 seconds
Pump Air/Hydraulic
Air Pressure 125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure 6,000 PSI
Power Requirement None
Shipping Weight 708 lbs. (321 kg)
Shipping Dimensions 48" x 29" x 18" (1,238 mm x 736 mm x 457 mm)

Pick Up and Delivery

Our Pick Up locations for BendPak are located in Santa Paula, California & Theodore, Alabama.

Call, text, or chat with us if you have questions. 866-774-7743

Downloads

Brochure
Manual
Warranty
 
0 0 Reviews
Write a Review

Reviews