Product Description
BendPak RBJ18000 18,000-lb. Capacity Rolling Bridge Jack
The powerful 18,000-lb. capacity RBJ18000 rolling bridge jack is made for use with your HDS-35 or HDS-40 four-post lift series. Sometimes a vehicle’s center of gravity that isn’t in the exact middle of the vehicle. In this case, even a 30,000-lb. vehicle might require a jack that is rated for more than half the vehicle’s weight.
Lift 18,000 lbs. for Full Wheel Service Capability
While the 18,000-lb. capacity RBJ18000 will handle the weight of many heavy-duty vehicles, some larger trucks, buses and commercial drivers have significantly offset centers of gravity. It’s important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of the RBJ18000 will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift series.
Steel contact pads
BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars.
High-pressure hydraulic power unit
The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you’re raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat.
Three lock levels
Your work, your shop. With three lock positions, your rolling bridge jack adapts to the way you get things done. Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more. With three lock positions on the jack, your ultimate working height is that much more versatile.
Product Features
- 18,000-lb. lifting capacity
- Steal contact pads
- High-pressure hydraulic power unit
- Optional air-line kit
Product Specifications
| Lifting Capacity | 18,000 lbs. (8,165 kg) |
| Suitable Lift Model(s) | HDS-40 Series |
Min. Drive-Over Height
| Short Arm Pad | 9" (229 mm) |
| Short Top Pad | 9.75" (248 mm) |
| Tall Arm Pad | 10.5" (267 mm) |
| Tall Top Pad | 11.25" (286 mm) |
Max. Lifting Height
| Short Arm Pad | 19" (483 mm) |
| Short Top Pad | 19.75" (502 mm) |
| Tall Arm Pad | 20.5" (521 mm) |
| Tall Top Pad | 21.25" (540 mm) |
Reach
| Support Base Width | 45" (1,143 mm) |
| Max. Arm Pad Reach | 63.75" (1,619 mm) |
| Min. Arm Pad Reach | 48.5" (1,232 mm) |
| Max. Top Pad Reach | 39.5" (1,003 mm) |
| Min. Top Pad Reach | 8" (203 mm) |
| Time to Full Rise | 55 seconds |
| Pump | Air/Hydraulic |
| Air Pressure | 125 PSI (10-25 CFM) |
| Max. Operating Hydraulic Pressure | 7,200 PSI |
| Power Requirement | None |
| Shipping Weight | 792 lbs. (359 kg) |
| Shipping Dimensions | 47" x 29" x 17" (1,206 mm x 736 mm x 431 mm) |
Pick Up and Delivery
Our Pick Up locations for BendPak are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions. 866-774-7743
Downloads
Brochure
Manual
Warranty
