DANNMAR D2-8F 8,000 lb. Floor Plate 2 Post Lift
Couldn't load pickup availability
Shipping-FAQ's
Shipping Info
At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.

I Have The Equipment To Unload My Order
- Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.Aspects to keep in mind when choosing this option.
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
- In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
Aspects to keep in mind when choosing this option.
1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.

Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
Aspects to keep in mind when choosing this option.
1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.


Product Description
DANNMAR D2-8F 8,000 lb. Floor Plate 2 Post Lift
The D2-8F has quick lifting speed with a hearty amount of features to increase usefulness and productivity. These features provide lower operating costs and quicker repair times. If you’re looking to work with less hassle, check out Dannmar’s short-style D2-8F automobile lift as the perfect lift for your shop.
Two-Stage Telescoping Screw Pad Assembly Kit
The D2-8F two-post lift utilizes Dannmar’s double-telescoping screw pads. Dannmar’s pads are rugged and resist hard use and gouging. Strong construction ensures safe operation. The 63 mm adapters are stackable and include a standard set to accompany each lift, helping reach the lifting points on most any vehicle.
Triple-telescoping front arms and two-stage rear arms
Multi-stage arms are adaptable enough to work with several vehicle types. The arm sweep and minimum arm reach on this lift are extended, so the arms can lift most unibody vehicles. They typically will reach factory-recommended lift points and work with a range of wheelbases.
Low-profile, dropped-end frame contact pads
From daily drivers to race cars to high-performance import sedans, Dannmar’s car lift has the versatility to slide under your chassis without damaging your vehicle’s undercarriage or frame.
Lowered arm tube supports
Dannmar’s tube arms have been redesigned to make it easier to open doors when vehicle lift points are engaged. This is especially useful if your vehicle has low-opening doors. Dannmar makes every effort to prevent damage to your vehicle’s body with the two-post lift design.

Product Features
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Telescoping arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53" tall carriage for superior strength
- Triple-telescoping arm design
- Versatile drop-in contact pads with stackable adapters.

Product Specifications
Style | Floorplate |
Lifting capacity | 8,000 lbs. (3,629 kg) |
A - Lowered Height + Pad | 4.25” (108 mm) |
B - Max. Lift Height (Top Lock) | 80.5” (2,045 mm) |
C - Max. Rise | 72” (1,829 mm) |
D - Height Overall | 123” (3,128 mm) |
E - Width Overall | 132” (3,353 mm) or 145” (3,683 mm) |
F - Width Outside Columns | 126.75” (3,219 mm) or 139.75” (3,550 mm) |
G - Width Inside Columns | 105” (2,667 mm) or 118” (2,997 mm) |
H - Drive-Thru Clearance | 93” (2,362 mm) or 106” (2,692 mm) |
I - Floor to Top Switch | 8.5” (216 mm) |
J - Floorplate Height | 1.25" (33 mm) |
K - Arm Reach | 32.25" (819 mm) - 52.25” (1,327 mm) |
Max. Load per Arm | 2,000 lbs. (907 kg) |
Time to Full Rise | 45 Seconds |
Noise | 45 dB |
Motor | 220 VAC / 60 Hz / 1 Phase |
Shipping Weight | 2,618 lbs. (1,187.5 kgs) |
Shipping Dimensions | 117" x 25" x 36" (2,971 mm x 635 mm x 914 mm) |

Pick Up and Delivery
Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions. 866-774-7743
Downloads

Brochure

Manual

Warranty
