Atlas 12AWFSL Alignment Scissor Lift and RJ-6 Rolling Jack Combo
Couldn't load pickup availability
Shipping-FAQ's
Shipping Info
At Mechanic Superstore, our commitment is to provide you with the best customer service possible. For this reason, we offer you all kinds of delivery options so that you can choose the one that suits you best.

I Have The Equipment To Unload My Order
- Do you have a forklift, a high-capacity hoist, or a tractor in your facility? In that case, this option may be the one for you.Aspects to keep in mind when choosing this option.
- The most popular 2-post lifts (with 9,000 lb and 10,000 lb capacity) have a shipping weight of approximately 1,400 lbs and 1,900 lbs, respectively. On the other hand, a 15,000 lb capacity 2-post lift has a 2,700 lb shipping weight.
- Given the packaged lift and hydraulic power unit’s weight, they cannot be unloaded from the trailer by hand. Simply put, IT IS MANDATORY TO USE A SUITABLE FORKLIFT OR HOIST FOR UNLOADING THE LIFT.
- You are solely responsible for unloading your equipment from the truck. The truck driver cannot do this for you.
- Mechanic Superstore uses trustworthy freight companies to make the deliveries. It is your responsibility to be present on the scheduled date and time of the delivery.
- There will be a receiver charge of $135 if the truck driver arrives at the designated location and the customer does not have the necessary means ready to unload the lift.
- In case you do not have the necessary equipment to unload the equipment do not worry. Mechanics Superstore offers other delivery options.

Do you have a hitch trailer to transport your lift? If so, then this might be the best option.
Aspects to keep in mind when choosing this option.
1. Mechanics Superstore and our brands’ warehouses have the means to load your car lift into an appropriate trailer.
2. Given the weight and dimensions of car lifts, we cannot load lifts directly into vehicles or trucks. To safely transport your lift, you will need a hitch trailer. Will this option not work for you? Perhaps the warehouse is too far from your location? If so, keep reading.

Think of this option as a variation of the previous one. Even so, this could be an excellent alternative to picking up the lift at one of our warehouses. Instead, we can take the car lift to a warehouse closer to your location.
You will still need a hitch trailer to transport the lift for this option, but you can save on freight costs if you have an LTL Carrier close to your shop.

Neither of the above delivery options suits you? Then we have the solution.
We will dispatch your lifts directly to a local installer in your area. This way, you will not have to worry about anything since the installer would be in charge of the logistics.
Aspects to keep in mind when choosing this option.
1. You still have to pay the freight fee to the installer (or dock hold for the installer to pick up the lift)
2. We will quote th e installation fee before you pay for the lift so that you can get an idea of the total amount to pay (car lift + freight + installation).
Do you have another delivery option in mind? In that case, do not hesitate to contact us. At Mechanic Superstore, we are open to all kinds of solutions, as long as they comply with the relevant local regulations and safety standards.

Atlas 12AWFSL Alignment Scissor Lift and RJ-6 Rolling Jack Combo
The Atlas® 12AWFSL is a full-rise alignment scissor lift designed for surface or flush mount installation. This commercial grade lift is built for the busiest service centers and is made to last. With over 7’ of lifting height, it allows easy access to the underside of the vehicle. The 12AWFSL features built-in slip plates and comes with a set of turntables and covers. Its open-center design with full frame undercarriage provides structural strength while allowing for undercar service access.
Its 72” long approach ramps allow for a lower degree angle to accommodate low ground clearance vehicles. Each platform has four locking positions that allow the technician to set different platform heights for correct lifting level. The operator can easily level each platform using a lock ladder leveling system. Each platform is equipped with 16 mechanical locks that are welded on the inside of the runway. The scissor lift is equipped with an electric/hydraulic power unit to lift and lower the platform.
The Atlas® 12AWFSL scissor lift also includes an integrated wheels free system powered by the Atlas® RJ-6 rolling jack. The RJ-6 is designed to lift the vehicle off the runways to perform wheel and brake service. The RJ-6 is equipped with expandable rail supports which allow the rolling jack to be positioned properly for just about any vehicle. The RJ-6 rolling jack includes a set of truck adapters and rubber pads. The RJ-6 is air operated (70-105 PSI) and requires no electrical connections.
The Atlas® 12AWFSL full-rise scissor lift is a commercial grade alignment lift for the busiest professional service centers. The 12AWFSL can lift a variety of vehicles ranging from small passenger vehicles to medium-duty pick-up trucks. The open-center allows easy access to the underside of the vehicle for all types of service and the compact footprint makes it ideal for service centers that need to get the most out of their shop layout.