Dannmar helps you increase your tire shop’s workflow with a rugged tire changer that features a swing-arm design for direct wheel service. The Dannmar DT-50 swing-arm tire changer is an affordable tire machine designed to handle the basic needs of tire shops. Dannmar’s sturdy body, rigid 45 mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during daily tire service procedures. The DT-50’s supersized turntable offers an internal clamping capacity of 26” and external clamping capacity of 24”. With so many time-saving and well-engineered features, you’ll be glad you chose the affordable Dannmar DT-50 Tire Changer.
The Dannmar DT-50 swing-arm tire changer is affordable and incorporates controls mounted upfront that are logically arranged for both speed and ease-of-use. The Dannmar tire changer is designed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging allow wheels.
Here are some of Dannmar’s DT-50 many features that save you time and make your job produce better results.
High-torque electric turntable
Featuring faster operating speeds and reverse-direction control for easier tire swaps, especially for low-profile and run-flat beads.
Enhanced bead breaker blade
The Dannmar DT-50 tire changers are manufactured with an advanced bead breaker blade. A rubber bump-stop ensures a smooth arm return, reducing shock loading.
Every main‐lead electrical terminal, auxiliary switch, and motor enclosure is air‐tight, dust‐free and protected from contamination.
High-pressure polyurethane pneumatic tubing
Dannmar tire changers come standard with high-pressure polyurethane pneumatic tubing that’s constructed with a smooth, seamless bore to improve flow.
Dannmar’s tire changer controls and forged-steel foot pedal levers are conveniently positioned and logically arranged for both speed and ease-of-use.
Aluminum pneumatic cylinders
Dannmar optimizes the stainless steel and aluminum pneumatic cylinders. Specifically, we’ve made sure internal end-of-stroke cushions come included on each cylinder, protecting the seals, wear band and piston rod.
Alloy steel mount and demount head
The equi-dimensional shape of our mount and demount head lets you change tires without changing the position of the tool head. The tool head surface is manufactured micro-smooth.
45mm spring assist hexagonal vertical tool shaft
A rigid 45mm spring assist hexagonal vertical tool shaft and hardened‐steel horizontal outrigger support arm keep the mount-demount tool head perfectly still during use. This reduces the chance of damaging expensive wheels due to a loose or shifting tool head. The tire changer is fitted with linear guide bearings that make it easy to adjust both vertical and horizontal wheel settings. These guide bearings are maintenance-free for the lifespan of the tire changer. The non‐flex horizontal arm boasts a hardened lower roller guide for controlled, balanced movements.
Tire inflator features
A pistol-type tire inflator with a sure‐grip clip‐on valve chuck has never been easier to operate and permits full-function, hands‐free operation.
- Swing arm
- High torque electric turntable
- Alloy steel mount and demount head
- Wheel clamping method 4 clamps internal rim clamping
- Capacity 12”– 26” (305 mm - 660 mm)
- Maintenance-free gearbox
- Aluminum pneumatic cylinders
- High pressure polyurethane pneumatic tubing
- Inflation gauge with Integrated air dump valve
- Tool tray/storage
- Enhanced bead breaker blade
- Air regulator
- Inflation restraint
- Forged-steel foot pedals
|110/220-VAC, 50-60 Hz, 1-Ph
|Drive System Type
|Electric / Air
|Rigid Fixed / Swing Arm
|Power Assist Tower
|Bead Seating System
|Turbo Blast / Bead Seating
|110-175 PSI (8-10 BAR)
|Wheel Clamping Method
|4 Clamps - Internal / External
|Table Clamping System
|Dual Pneumatic Cylinders
|Bead Breaking System
|Internal Rim Clamping Capacity
|14” – 26” (356 mm - 660 mm)
|External Rim Clamping Capacity
|12” – 22” (305 mm - 559 mm)
|Turntable Rim Width Capacity
|3” – 15” (76 mm – 381 mm)
|Bead Breaker Rim Width Capacity
|3” – 14” (76 mm – 356 mm)
|Maximum Tire Diameter
|47” (1,194 mm)
|< 70 dB
|570 lbs. (258.5 kgs)
|44" x 50" x 36" (1,117 mm x 1,270 mm x 914 mm)
Pick Up and Delivery
Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions. 866-774-7743